Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/102225
Full metadata record
DC FieldValueLanguage
dc.contributor.authorWang, Jun Junen
dc.contributor.authorZhang, Yue Pingen
dc.contributor.authorChua, Kai Mengen
dc.contributor.authorLu, Albert Chee Waien
dc.date.accessioned2009-06-22T09:21:42Zen
dc.date.accessioned2019-12-06T20:51:55Z-
dc.date.available2009-06-22T09:21:42Zen
dc.date.available2019-12-06T20:51:55Z-
dc.date.copyright2005en
dc.date.issued2005en
dc.identifier.citationWang, J. J., Zhang, Y. P., Chua, K. M., & Lu, A. C. W. (2005). Circuit model of microstrip patch antenna on ceramic land grid array package for antenna-chip codesign of highly integrated RF transceivers. IEEE Transactions on Antennas and Propagation, 53(12), 3877-3883.en
dc.identifier.issn0018-926Xen
dc.identifier.urihttps://hdl.handle.net/10356/102225-
dc.identifier.urihttp://hdl.handle.net/10220/4649en
dc.description.abstractThis paper presents the circuit model of a microstrip patch antenna on a ceramic land grid array (CLGA) package for the antenna-chip codesign of a highly integrated radio-frequency (RF) transceiver. The microstrip patch antenna is fed by packaging interconnect components such as bond wires, signal traces, and vias in a ground-signal-ground (G-S-G) configuration from the carried chip. The circuit model that consists of RLC lumped elements of both microstrip patch antenna and feeding interconnect components has been developed with an emphasis on verifying existing or deriving analytical formulas. The RLC values of the microstrip patch antenna are calculated with our improvements to existing computer-aided design formulas, while the RLC values of the feeding interconnect components are calculated with more efforts. In particular the C values related to the vias and signal traces require to be calculated numerically and they are calculated here with the method of moments and the conformal mapping method, respectively. The circuit model is validated with numerical simulations (High Frequency Structure Simulator) and network analyzer measurements.en
dc.format.extent7 p.en
dc.language.isoenen
dc.relation.ispartofseriesIEEE transactions on antennas and propagationen
dc.rights© 2005 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. http://www.ieee.org/portal/site This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder.en
dc.subjectDRNTU::Engineering::Electrical and electronic engineeringen
dc.titleCircuit model of microstrip patch antenna on ceramic land grid array package for antenna-chip codesign of highly integrated RF transceiversen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen
dc.description.versionPublished versionen
item.grantfulltextopen-
item.fulltextWith Fulltext-
Appears in Collections:EEE Journal Articles

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.