Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/102341
Full metadata record
DC FieldValueLanguage
dc.contributor.authorTang, J. H.en
dc.contributor.authorSridhar, I.en
dc.contributor.authorSrikanth, N.en
dc.date.accessioned2014-03-25T09:03:10Zen
dc.date.accessioned2019-12-06T20:53:43Z-
dc.date.available2014-03-25T09:03:10Zen
dc.date.available2019-12-06T20:53:43Z-
dc.date.copyright2013en
dc.date.issued2013en
dc.identifier.citationTang, J. H., Sridhar, I., & Srikanth, N. (2013). Static and fatigue failure analysis of adhesively bonded thick composite single lap joints. Composites Science and Technology, 86, 18-25.en
dc.identifier.urihttps://hdl.handle.net/10356/102341-
dc.identifier.urihttp://hdl.handle.net/10220/18970en
dc.description.abstractStatic and fatigue behavior of thick composite laminate single lap joints with thick adhesive bondline is experimentally and numerically investigated. Stress based analysis is used to understand the uniaxial tensile behavior of thick glass fiber reinforced epoxy laminates bonded with relatively thick epoxy adhesive. The effect of adhesive thickness on relatively thick adherend on the fatigue initiation life was modeled with generalized stress singularity approach. It was observed that the failure onset always occurred at adherend–adhesive interface. Subsequent crack propagation mostly resulted in interlaminar failure of adjacent first angle ply near to this interface. Both static and fatigue strength values decrease with increase of bondline thickness. Evaluation of generalized stress intensity factors of the corner geometry (square edge joint) provided a good correlation between predictions and experimental measurements.en
dc.language.isoenen
dc.relation.ispartofseriesComposites science and technologyen
dc.rights© 2013 Elsevier Ltd. This is the author created version of a work that has been peer reviewed and accepted for publication by Composites Science and Technology, Elsevier Ltd. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [DOI: http://dx.doi.org/10.1016/j.compscitech.2013.06.018].en
dc.subjectDRNTU::Engineering::Mechanical engineering::Alternative, renewable energy sourcesen
dc.titleStatic and fatigue failure analysis of adhesively bonded thick composite single lap jointsen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.contributor.researchEnergy Research Institute @NTUen
dc.contributor.researchEnergy Research Institute @NTUen
dc.identifier.doi10.1016/j.compscitech.2013.06.018en
dc.description.versionAccepted versionen
dc.identifier.rims176618en
item.fulltextWith Fulltext-
item.grantfulltextopen-
Appears in Collections:ERI@N Journal Articles
MAE Journal Articles
Files in This Item:
File Description SizeFormat 
CST_manuscript.pdf284.24 kBAdobe PDFThumbnail
View/Open

Google ScholarTM

Check

Altmetric

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.