Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/103466
Title: Practical model for predicting corrosion rate of steel reinforcement in concrete structures
Authors: Yu, Bo
Yang, LuFeng
Wu, Ming
Li, Bing
Keywords: DRNTU::Engineering::Civil engineering::Structures and design
Issue Date: 2013
Source: Yu, B., Yang, L., Wu, M., & Li, B. (2014). Practical model for predicting corrosion rate of steel reinforcement in concrete structures. Construction and Building Materials, 54, 385-401.
Series/Report no.: Construction and building materials
Abstract: A practical model for predicting corrosion rate of steel reinforcement in concrete structures was proposed. The numerical model with nonlinear boundary conditions for macro cell corrosion of steel reinforcement in concrete structures was established based on electrochemical principles and the Bulter-Volmer equation. The influences of parameters such as anode-to-cathode (A/C)ratio, relative humidity, concrete resistivity, cover thickness on the corrosion control mode and corrosion rate of steel reinforcement in concrete structures were then investigated. Finally, a practical model for predicting corrosion rate of steel reinforcement in concrete structures was proposed based on a comprehensive nonlinear regression analysis with easily quantifiable engineering parameters, such as water-to-cement (W/C)ratio, chloride content, thickness of concrete cover and relative humidity. Model comparison and experimental verification demonstrate that the proposed prediction model is of good accuracy and applicability to real life scenarios in terms of capturing the corrosion behavior of steel reinforcement in different situations.
URI: https://hdl.handle.net/10356/103466
http://hdl.handle.net/10220/20002
ISSN: 0950-0618
DOI: 10.1016/j.conbuildmat.2013.12.046
Rights: © 2013 Elsevier. This is the author created version of a work that has been peer reviewed and accepted for publication by Construction and Building Materials, Elsevier. It incorporates referee’s comments but changes resulting from the publishing process, such as copy editing, structural formatting, may not be reflected in this document. The published version is available at: [DOI:http://dx.doi.org/10.1016/j.conbuildmat.2013.12.046].
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:CEE Journal Articles

Files in This Item:
File Description SizeFormat 
Practical model for prediction of corrosion rate.pdf1.25 MBAdobe PDFThumbnail
View/Open

SCOPUSTM   
Citations

50
checked on Sep 7, 2020

WEB OF SCIENCETM
Citations

39
checked on Oct 25, 2020

Page view(s)

479
checked on Oct 28, 2020

Download(s)

22
checked on Oct 28, 2020

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.