Please use this identifier to cite or link to this item:
Title: Investigation of laser-induced plasma evolution in flexible pad laser shock forming with high speed camera
Authors: Nagarajan, Balasubramanian
Wang, Zhongke
Castagne, Sylvie
Zheng, Hongyu
Keywords: DRNTU::Engineering::Manufacturing
Issue Date: 2014
Source: Nagarajan, B., Wang, Z., Castagne, S., & Zheng, H.Y. (2014). Investigation of laser-induced plasma evolution in flexible pad laser shock forming with high speed camera. Applied surface science, 308, 221-229.
Series/Report no.: Applied surface science
Abstract: This study investigated the effect of plasma evolution, which dominates the forming load, on the fabrication of microcraters in flexible pad laser shock forming (FPLSF) using a high speed camera. It has been found that the plasma lifetime starting from plasma formation, expansion, decaying to vanishing was less than 13.3 us at single pulse ablation, 350 times longer than the pulse duration. When 45 pulses were applied as 5 cycles with 9 pulse train in each, the plasma size increased gradually to its maximum at the fifth or sixth pulse. There was no interference between the plasma generated from each pulse. The first pulse was sufficient for the fabrication of a crater. The crater depth and diameter increased only by 10% and 25% respectively at ablation with 45 pulses. At 45 pulses ablation for fluence from 7.3 J/cm2 to 20.9 J/cm2 in water confinement, the change factor appeared in descending sequence from laser fluence, maximum plasma diameter, maximum plasma pressure, to crater depth by the order of 2.86, 2.18, 1.69 and 1.47 respectively. In glass, the plasma diameter increased by 3.28 times at increasing laser fluence. The confined plasma in glass resulted in deeper craters. The smaller craters in water were attributed to the forming load diminution due to the plasma expansion, shockwave attenuation in ablative overlay, and the laser energy reduction.
ISSN: 0169-4332
DOI: 10.1016/j.apsusc.2014.04.139
Rights: © 2014 Elsevier B.V. This is the author created version of a work that has been peer reviewed and accepted for publication by Applied Surface Science, Elsevier B.V. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [].
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:MAE Journal Articles

Files in This Item:
File Description SizeFormat 
ASS Plasma Study Accepted.pdf1.11 MBAdobe PDFThumbnail

Citations 20

Updated on Mar 3, 2021

Citations 20

Updated on Mar 9, 2021

Page view(s) 10

Updated on Jan 28, 2022

Download(s) 20

Updated on Jan 28, 2022

Google ScholarTM




Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.