Please use this identifier to cite or link to this item:
|Title:||Tough and dense boron carbide obtained by high-pressure (300 MPa) and low-temperature (1600°C) spark plasma sintering||Authors:||Badica, Petre
Xie, Sky Shumao
Reece, Mike J.
|Keywords:||DRNTU::Engineering::Materials::Ceramic materials||Issue Date:||2014||Source:||Badica, P., Grasso, S., Borodianska, H., Xie, S. S., Li, P., Tatarko, P., et al. (2014). Tough and dense boron carbide obtained by high-pressure (300 MPa) and low-temperature (1600^|^deg;C) spark plasma sintering. Journal of the Ceramic Society of Japan, 122(1424), 271-275.||Series/Report no.:||Journal of the ceramic society of Japan||Abstract:||Dense boron carbide (above 95%) was achieved through high pressure (300 MPa) and low temperature (1600°C) Spark Plasma Sintering (SPS). This approach resulted in improvement of fracture toughness and of dynamic toughness when compared to corresponding toughness values of the sample sintered by conventional SPS (2100°C, 50 MPa). Dynamic toughness was extracted from Split Hopkinson Pressure Bar measurements. Results are understood based on microstructure and on very different behaviour of the samples in respect to residual B2O3 and carbon available in the raw B4C powder.||URI:||https://hdl.handle.net/10356/105276
|ISSN:||0914-5400||DOI:||10.2109/jcersj2.122.271||Rights:||© 2014 The Ceramic Society of Japan. This paper was published in Journal of the Ceramic Society of Japan and is made available as an electronic reprint (preprint) with permission of The Ceramic Society of Japan. The paper can be found at the following official DOI: http://dx.doi.org/10.2109/jcersj2.122.271. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.||Fulltext Permission:||open||Fulltext Availability:||With Fulltext|
|Appears in Collections:||TL Journal Articles|
Updated on Dec 28, 2021
Updated on Mar 6, 2021
Page view(s) 50496
Updated on Jul 3, 2022
Updated on Jul 3, 2022
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.