Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAhmad Bin Anwaren
dc.contributor.authorPham, Quang-Cuongen
dc.identifier.citationAnwar, A. B., & Pham, Q. C. (2018). Study of the spatter distribution on the powder bed during selective laser melting. Additive Manufacturing, 22, 86-97.doi:10.1016/j.addma.2018.04.036en
dc.description.abstractIn Selective Laser Melting (SLM), inert gas is pumped into the chamber to eliminate the deleterious by-products, which includes spatter. Despite this, traces of spatter on the powder bed have always been observed. Earlier research mainly focussed on the formation and characterization of spatter particles that were freshly ejected from the melt pool. However, in this study, the quantification of the spatter distribution on the powder bed was performed, following their transport by the inert gas flow which was varied at two gas pump settings (60 and 67%). Image processing for spatter detection based on contrast was first conducted. The sieved out spatter particles were quantified by precision weighing of mass. Optical microscopy was then utilised for size determination. The majority of spatter particles were originally distributed along the −x direction, as observed from the top down images taken. It was found that spatter was generally transported in the −x direction with the mass and size gradually decreasing with distance from the scanned regions. However, increasing the gas flow velocity did not correspond to a lesser mass distribution. Computations on the Stk number revealed that at the gas pump setting of 67%, spatter particles of greater size were deposited earlier on the powder bed, suggesting that increasing the gas flow velocity to a large extent would increase the likelihood of powder bed contamination. The forward extrapolation of the exponential Stk number trendlines also elucidated the reason for the limitations on the width of the powder bed in machines designed by SLM Solutions.en
dc.format.extent28 P.en
dc.relation.ispartofseriesAdditive Manufacturingen
dc.rights© 2018 Elsevier B.V. All rights reserved. This paper was published in Additive Manufacturing and is made available with permission of Elsevier B.V.en
dc.subjectDRNTU::Engineering::Mechanical engineeringen
dc.subjectSelective Laser Meltingen
dc.subjectAdditive Manufacturingen
dc.titleStudy of the spatter distribution on the powder bed during selective laser meltingen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.contributor.researchSingapore Centre for 3D Printingen
dc.description.versionAccepted versionen
item.fulltextWith Fulltext-
Appears in Collections:MAE Journal Articles
SC3DP Journal Articles
Files in This Item:
File Description SizeFormat 
SpatterDistribution.pdf14.68 MBAdobe PDFThumbnail

Google ScholarTM



Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.