Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorGuo, Mei-Lingen
dc.contributor.authorLiu, Junen
dc.contributor.authorTan, Ming-Jenen
dc.contributor.authorChua, Beng-Wahen
dc.identifier.citationGuo, M.-L., Liu, J., Tan, M.-J.,& Chua, B.-W. (2014). Microstructure evolution of Ti-6Al-4V during superplastic-like forming. Procedia engineering, 81, 1090-1095.en
dc.description.abstractSuperplastic-like forming is a recent developed sheet-forming process that combines hot drawing (mechanical pre-forming) with gas forming. It is an efficient way to form sheet metals into complex parts for automotive and aerospace industries. In comparison with conventional superplastic forming process, the forming time for superplastic-like forming can be significantly shortened as the hot-drawing step would have produced a pre-formed component before gas forming. The other advantage of the superplastic-like forming is its capacity for lower temperature forming, for which superplasticity is not possible. Non-superplastic grade Ti-6Al-4V sheets were successfully formed by superplastic-like forming at 800 °C in 16 min. The maximum percentage thinning of 54% occurred at the outward corners. In this paper, electron backscatter diffraction (EBSD) was used to examine the microstructure evolution of Ti-6Al-4V at different forming stages during superplastic-like forming process. Some small equiaxed grains, regarded as newly recrystallized grains, were observed near the deformed area after hot drawing. Grains became more randomly distributed as the recrystallization continued during gas forming stage. The as-received structures were finally replaced by the equiaxed grains with an almost random misorientation distribution after the forming process. Dynamic recrystallization was considered as the main deformation mechanism for the non-superplastic grade Ti-6Al-4V alloy.en
dc.format.extent6 p.en
dc.relation.ispartofseriesProcedia Engineeringen
dc.rights© 2014 Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license ( Selection and peer-review under responsibility of the Department of Materials Science and Engineering, Nagoya University.en
dc.subjectDRNTU::Engineering::Aeronautical engineering::Materials of constructionen
dc.titleMicrostructure evolution of Ti-6Al-4V during superplastic-like formingen
dc.typeConference Paperen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.contributor.conferenceInternational Conference on Technology of Plasticity, ICTP (11th : 2014)en
dc.contributor.organizationA*STAR SIMTechen
dc.description.versionPublished versionen
item.fulltextWith Fulltext-
Appears in Collections:MAE Conference Papers
SIMTech Conference Papers
Files in This Item:
File Description SizeFormat 
Microstructure Evolution of Ti-6Al-4V during Superplastic-like Forming.pdf1.95 MBAdobe PDFThumbnail

Citations 20

Updated on Aug 31, 2020

Citations 20

Updated on Mar 9, 2021

Page view(s) 20

Updated on May 10, 2021

Download(s) 5

Updated on May 10, 2021

Google ScholarTM




Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.