Please use this identifier to cite or link to this item:
|Title:||A plasmonically enhanced polymer solar cell with gold–silica core–shell nanorods||Authors:||Heeger, Alan J.
Kyaw, Aung Ko Ko
Wong, Terence Kin Shun
|Keywords:||Polymer solar cells
|Issue Date:||2013||Source:||Xu, X., Kyaw, A. K. K., Peng, B., Zhao, D., Wong, T. K. S., Xiong, Q., et al. (2013). A plasmonically enhanced polymer solar cell with gold–silica core–shell nanorods. Organic electronics, 14(9), 2360-2368.||Series/Report no.:||Organic electronics||Abstract:||We report the use of chemically synthesized gold (Au)–silica core–shell nanorods with the length of 92.5 ± 8.0 nm and diameter of 34.3 ± 4.0 nm for the efficiency enhancement of bulk heterojunction (BHJ) polymer solar cells. Silica coated Au nanorods were randomly blended into the BHJ layers of these solar cells. This architecture inhibits the carrier recombination at the metal/polymer interface and effectively exploits light absorption at the surface plasmon resonance wavelengths of the Au–silica nanorods. To match the two plasmon resonant peaks of the Au–silica nanorods, we employed a low bandgap polymer, poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b′] dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBT) to construct a solar cell. The absorption spectrum of PCPDTBT:[6,6]-phenyl-C71-butyric acid methyl ester (PC70BM) is relatively wide and matches the two plasmon resonance peaks of Au–silica nanorods, which leads to greater plasmonic effects. We also constructed the poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PC60BM) cells for comparison. The absorption spectrum of P3HT:PC60BM only overlaps one of the plasmon resonance peak of Au–silica nanorods. The efficiency of the P3HT:PC60BM device incorporating optimized Au–silica nanorods is enhanced by 12.9% from 3.17% to 3.58%, which is due to the enhanced light absorption. Compared with the P3HT:PC60BM device with Au–silica nanorods, the PCPDTBT:PC70BM device with 1 wt% Au–silica nanorods concentration has a higher efficiency of 4.4% with an increase of 26%.||URI:||https://hdl.handle.net/10356/106930
|ISSN:||1566-1199||DOI:||10.1016/j.orgel.2013.05.038||Rights:||© 2013 Elsevier. This is the author created version of a work that has been peer reviewed and accepted for publication by Organic Electronics, Elsevier. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [http://dx.doi.org/10.1016/j.orgel.2013.05.038].||Fulltext Permission:||open||Fulltext Availability:||With Fulltext|
|Appears in Collections:||EEE Journal Articles|
SPMS Journal Articles
Files in This Item:
|A plasmonically enhanced polymer solar cell with gold-silica core-shell nanorods.pdf||874.85 kB||Adobe PDF|
Updated on Aug 31, 2020
Updated on Jan 19, 2021
Updated on Jan 22, 2021
Updated on Jan 22, 2021
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.