Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/13319
Title: Development of a speedometer cum odometer for roller blading
Authors: Shein, U Kyin.
Keywords: DRNTU::Engineering::Electrical and electronic engineering::Control and instrumentation
DRNTU::Engineering::Manufacturing::Product design
Issue Date: 1998
Abstract: This report describes the development of a speedometer cum odometer for roller blading that is affordable and meant for retrofit installation on a wide range of available roller skates. An experimental prototype has been successfully developed, based on an optical sensing technique and using embedded microprocessor control. The system can display the speed of roller blading and the total distance travelled. It can also alert the skater whenever a preset high speed is exceeded. To cater to the different strides and skating patterns of users, the system can be calibrated accordingly. The settings to allow for different wheel sizes are also provided. The experimental prototype has been successfully tested in a number of calibration runs. An estimate for the per-unit cost of the system in mass production volume has been performed, and was found to be low cost. It is believed that the proposed speedometer cum odometer could be developed into a successful consumer product.
URI: http://hdl.handle.net/10356/13319
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Theses

Files in This Item:
File Description SizeFormat 
UKyinShein1998.pdf
  Restricted Access
Main report6.3 MBAdobe PDFView/Open

Page view(s) 50

236
Updated on Nov 24, 2020

Download(s) 50

2
Updated on Nov 24, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.