dc.contributor.authorZhu, Junen_US
dc.date.accessioned2008-07-22T01:01:55Zen_US
dc.date.accessioned2008-10-20T08:16:46Z
dc.date.accessioned2017-07-23T08:39:13Z
dc.date.available2008-07-22T01:01:55Zen_US
dc.date.available2008-10-20T08:16:46Z
dc.date.available2017-07-23T08:39:13Z
dc.date.copyright2008en_US
dc.date.issued2008en_US
dc.identifier.citationZhu, J. (2008). Model updating of microsystems using test data. Doctoral thesis, Nanyang Technological University, Singapore.
dc.identifier.urihttp://hdl.handle.net/10356/13416
dc.description.abstractIn modern electronics technology, the rapid advances of microsystems present an imperative requirement in the modeling and the testing of their dynamic characteristics. Due to particular sophistication of microsystems in design and fabrication, finite element (FE) method has limitations to produce accurate mathematical models for microsystems. To obtain a credible analytical model of a microsystem, model updating is employed as an effective approach for improving the FE model using vibration test data. Considering particular testing techniques and damped microstructures of microsystems, this dissertation deals with the research on development of identification of damped structures and suitable updating methods for microsystems. The relationship between structural and viscous damping models in damped systems has been addressed. A complex FRF method has been proposed for generally damped structures. A novel method directly using base excitation test data has been developed successfully for model updating. The modal identification procedure, where a damping model is arbitrarily chosen for a damped system in the cases of viscous and structural damping, has been studied. It is shown that an exact relationship exists between structural and viscous damping models in a proportionally damped system. The identified damping matrix is not proportional though the equivalent mode shapes remain real. For a non-proportionally damped system, the equivalent mode shapes consist with their counterparts of the original system except differing by a complex scaling factor. It is demonstrated efficiently by numerical studies and an experimental example that the error in estimating modal parameters induced by wrong interpretation of damping model is quite small. In addition, the equivalent damping matrix is physically meaningful in the case of a system with distributed damping while there is no such equivalent damping matrix if the damping is localized.en_US
dc.format.extent278 p.en_US
dc.language.isoenen_US
dc.subjectDRNTU::Engineering::Electrical and electronic engineering::Microelectromechanical systemsen_US
dc.titleModel updating of microsystems using test dataen_US
dc.typeThesisen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.contributor.supervisorLin Rongmingen_US
dc.description.degreeDOCTOR OF PHILOSOPHY (MAE)en_US


Files in this item

FilesSizeFormatView
Thesis_PDF.pdf3.132Mbapplication/pdfView/Open

This item appears in the following Collection(s)

Show simple item record