Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/13473
Full metadata record
DC FieldValueLanguage
dc.contributor.authorJi, Chun Haien_US
dc.date.accessioned2008-07-30T06:56:46Zen_US
dc.date.accessioned2008-10-20T08:19:51Z
dc.date.available2008-07-30T06:56:46Zen_US
dc.date.available2008-10-20T08:19:51Z
dc.date.copyright1999en_US
dc.date.issued1999en_US
dc.identifier.urihttp://hdl.handle.net/10356/13473
dc.description.abstractDilatometry study, as a prelude to the actual sintering study, was conducted using a Netzsch DIL-402C dilatometer. The shrinkages of the specimens under different temperature, heating rate and sintering time were analyzed. The higher the heating rate, the larger is the shrinkage. The largest shrinkage was as high as 17.62% using a heating rate of 20 K/min, sintering temperature of 1350°C and a sintering time of 60 min. The values of the sintering factors for the actual sintering study were established from the dilatometry study.en_US
dc.format.extent187 p.en_US
dc.language.isoenen_US
dc.subjectDRNTU::Engineering::Manufacturingen_US
dc.titleMechanical properties of metal injection molding (MIM) partsen_US
dc.typeThesisen_US
dc.contributor.supervisorLoh, Ngiap Hiangen_US
dc.contributor.schoolSchool of Mechanical and Production Engineeringen_US
dc.description.degreeMaster of Engineering (MPE)en_US
item.fulltextWith Fulltext-
item.grantfulltextrestricted-
Appears in Collections:MAE Theses
Files in This Item:
File Description SizeFormat 
JI_CHUN_HAI_1999.pdf
  Restricted Access
24.31 MBAdobe PDFView/Open

Page view(s) 50

319
Updated on Jan 27, 2021

Download(s)

3
Updated on Jan 27, 2021

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.