Please use this identifier to cite or link to this item:
|Title:||Understanding the microstructural evolution of cold sprayed Ti-6Al-4V coatings on Ti-6Al-4V substrates||Authors:||Lek, Jun Yan
Tan, Adrian Wei-Yee
Buenconsejo, Pio John
Lam, Yeng Ming
Boothroyd, Chris B.
|Keywords:||Engineering::Materials||Issue Date:||2018||Source:||Lek, J. Y., Bhowmik, A., Tan, A. W.-Y., Sun, W., Song, X., Zhai, W., . . . Boothroyd, C. B. (2018). Understanding the microstructural evolution of cold sprayed Ti-6Al-4V coatings on Ti-6Al-4V substrates. Applied Surface Science, 459, 492-504. doi:10.1016/j.apsusc.2018.07.175||Journal:||Applied Surface Science||Abstract:||Rapid development of cold spray technology has made it a viable option to remanufacture and repair damaged engineering components made of Ti-6Al-4V (Ti64). This solid-state deposition process contributes to the distinctive microstructure of Ti64 coatings. In this study, the microstructural evolution of Ti64 from feedstock powder to coating as a result of high strain rate deformation is evaluated. TEM lamellae were extracted from the particle-substrate and particle-particle interfaces of a cold sprayed coating by focused ion beam milling and a comprehensive microstructural analysis was carried out. The feedstock powder is predominantly composed of martensitic lathes. The microstructure of the coating at the particle-substrate interface is noticeably different from the microstructure of the feedstock powder. Narrow regions consisting of nanometre-sized grains are observed in both the particle and substrate in the vicinity of the interface. Adiabatic shear instability under localized high strain rate deformation and heat accumulation are believed to be responsible for this observation. However, the martensitic structure is partially retained in the less deformed region of the particles, further away from the interfaces. The formation mechanism of the microstructure observed from the inner region of particle, at the vicinity of the particle-substrate and particle-particle interfaces respectively is discussed in the light of microstructural observations and finite element modelling.||URI:||https://hdl.handle.net/10356/136850||ISSN:||0169-4332||DOI:||10.1016/j.apsusc.2018.07.175||Rights:||© 2018 Elsevier B.V. All rights reserved. This paper was published in Applied Surface Science and is made available with permission of Elsevier B.V.||Fulltext Permission:||open||Fulltext Availability:||With Fulltext|
|Appears in Collections:||MAE Journal Articles|
Updated on Mar 10, 2021
Updated on Mar 4, 2021
Updated on Apr 13, 2021
Updated on Apr 13, 2021
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.