Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorWeng, Yiweien_US
dc.identifier.citationWeng, Y. (2019). Development and optimization of 3D printable cementitious composites for printing applications. Doctoral thesis, Nanyang Technological University, Singapore.en_US
dc.description.abstract3D concrete printing (3DCP) builds up objectives in a layer-atop-layer manner and has attracted much attention recently due to many advantages, such as customized production, reduced waste, and diminished lead-time of the rapid prototype. A number of works have been conducted in 3DCP in recent years. However, limitations remain in 3DCP, especially in the field of developing consistent and reliable cementitious materials for 3DCP. This thesis proposes a holistic approach to develop consistent and reliable 3D printable cementitious materials for large-scale printing applications. Three levels are included in the conceptualized methodology. Rheology control serves as a vital factor at the lowest level to ensure that material fresh properties can satisfy the printing requirement in terms of buildability, pumpability, setting control and shape retention capability. Afterwards, material design are the critical factors at the intermedium level to ensure that hardened properties of printed materials are suitable for structural or non-structural applications. Hardened properties are focused on compressive and flexure performance in this thesis. Process design focuses on the optimization of printing parameters for better material distribution and interlayer properties. Finally, integration of building information modeling (BIM) and architecture with 3DCP is expected to promote automatic construction fabrication for digitalized products at the third level. Due to time constraint of this PhD study, this thesis focused on the first two levels and the third level is discussed in the section on future work. The first level study focused on the influence of various factors on material rheological properties. Firstly, empirical models are constructed to predict the rheological properties based on material constituents and chemical admixtures. Secondly, theoretical models are developed to link rheological properties with printability in terms of buildability, which was validated by a new testing method proposed in this study. Thirdly, a class of rapid hardening materials, magnesia phosphate cement-based materials, is also developed. The second level study characterized the hardened properties of developed printable materials. Three different types of printable materials were investigated, i.e. plain cementitious materials, fiber reinforced cementitious materials, and rapid hardening cementitious materials, respectively. The hardened properties were studied in terms of compressive and flexural strength.en_US
dc.publisherNanyang Technological Universityen_US
dc.rightsThis work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).en_US
dc.subjectEngineering::Civil engineeringen_US
dc.titleDevelopment and optimization of 3D printable cementitious composites for printing applicationsen_US
dc.typeThesis-Doctor of Philosophyen_US
dc.contributor.supervisorQian Shunzhien_US
dc.contributor.schoolSchool of Civil and Environmental Engineeringen_US
dc.description.degreeDoctor of Philosophyen_US
dc.contributor.researchSingapore Centre for 3D Printingen_US
dc.contributor.supervisor2Tan Ming Jenen_US
item.fulltextWith Fulltext-
Appears in Collections:CEE Theses
Files in This Item:
File Description SizeFormat 
Weng Yiwei PhD thesis-FinalR1.pdf5.34 MBAdobe PDFView/Open

Page view(s) 50

Updated on Jan 23, 2022

Download(s) 20

Updated on Jan 23, 2022

Google ScholarTM




Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.