Please use this identifier to cite or link to this item:
|Title:||Phase measurements based indoor visible light positioning systems||Authors:||Zhang, Sheng||Keywords:||Engineering::Electrical and electronic engineering||Issue Date:||2020||Publisher:||Nanyang Technological University||Source:||Zhang, S. (2020). Phase measurements based indoor visible light positioning systems. Doctoral thesis, Nanyang Technological University, Singapore.||Abstract:||The widespread use of LED lamps in the illumination environments is witnessed from the early 21st century. Applications of LEDs in indoor communications have been gradually investigated in the last two decades. Companies like Pure-LiFi and Oledcomm (with the product Li-Fi MAX and MyLiFi bidirectional desk lamp), as well as many research institutes, are researching on the secure and high-speed visible light-based communication approach with good adaptivity. The fast development of visible light communication (VLC) provides a great chance for visible light positioning (VLP) systems. Moreover, researchers are seeking a feasible indoor positioning technology and developing an indoor GPS like system. As the GPS signals have severe multi-path effects and strong signal attenuations in indoor buildings, visible light with its line of sight (LOS) property and fewer reflections and diffractions gains advantages in the positioning accuracy over other RF-based techniques.There are several positioning algorithms, the simplest one in structure is the received signal strength (RSS) which has good signal-to-noise ratio (SNR) property, but is not feasible in situations with rotations and intensity disturbance. Time difference of arrival (TDOA) is one of the complicated algorithms, with high demand in hardware, but good robustness in rotations. Among the positioning algorithms, Phase difference of arrival (PDOA) is one of the compromises. PDOA is similar to the TDOA based method in concept, however, it uses continuous sine waves rather than short pulses, reducing the hardware complexity greatly. Meanwhile, PDOA can achieve both high positioning accuracy and rotation robustness. In this thesis, our first concern on the classical PDOA systems is the use of local oscillators (LOs). The LOs normally use hardware devices and the modulation frequencies are constrained by the multiples (harmonics) of a fundamental LO’s frequency. Also, such LOs are used in both transmitting and receiving sides, causing clock precision related errors. Hence, a system with virtual LOs (VLO) is proposed in this thesis, using software-generated signals, and a new algorithm with higher frequency allocation flexibility is also proposed. Therefore, the interferences of harmonics from the modulation frequencies are avoided and less band is occupied. The proposed techniques are hence promising in the combination of the VLC and VLP systems.Further researches reveal that PDOA systems using LOs (even with VLO) have an issue of pseudo synchronization. In actual applications, the signals received are truncated with a random time schedule and unsynchronized to the transmitter side. This causes a confusion of phases at the receiving end with leap solutions in inverse trigonometric functions, ending up with sudden phase changes. Therefore, a novel LO irrelevant positioning scheme is further proposed. The scheme with one extra transmission frequency is added on the transmitter side, with totally five signals carrying four distance information. The proposed algorithm has two distinguished differential processes on phase extractions. The distance difference measurements are extracted from the differential of PDOA signals, hence called DPDOA algorithm. Our proposed DPDOA algorithm requires no pseudo synchronization at the receiver ends and completely removes the LOs. Experimental validations illustrate sub-decimetre level positioning accuracy.In actual applications, the LED lamps have phase/time models different from the ideal sphere model and the performance of the PDOA/TDOA based system is hence compromised. A neural network (NN) based solution is proposed for the first time to address the onsite modeling and positioning problem in a single hidden layer NN. The proposed scheme largely reduces position solving calculations and significantly enhances the positioning performance. After examining phase and time-based VLP systems, it is found that phase/time measurements have generally higher SNR requirements than the RSS measurements. Meanwhile, the RSS as the most cost-efficient algorithm has higher SNR tolerance when no rotation or intensity disturbance occurs. The DPDOA algorithm is capable of functioning under rotation and intensity disturbances. Hence, we propose a hybrid algorithm of using both DPDOA and RSS measurements with selection based strategies. As the DPDOA signals contain both RSS and DPDOA information, no extra cost incurs. We design the T-selection and the V-selection strategies using hybrid DPDOA and RSS measurements as fundamental positioning standard, and show that the T-selection based system outperforms the V-selection based system.||URI:||https://hdl.handle.net/10356/137351||DOI:||10.32657/10356/137351||Rights:||This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).||Fulltext Permission:||open||Fulltext Availability:||With Fulltext|
|Appears in Collections:||EEE Theses|
Updated on Jun 21, 2021
Updated on Jun 21, 2021
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.