Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/139718
Full metadata record
DC FieldValueLanguage
dc.contributor.authorHoefler, Sebastian Franzen_US
dc.contributor.authorRath, Thomasen_US
dc.contributor.authorFischer, Rolanden_US
dc.contributor.authorLatal, Christineen_US
dc.contributor.authorHippler, Dorotheeen_US
dc.contributor.authorKoliogiorgos, Athanasiosen_US
dc.contributor.authorGalanakis, Iosifen_US
dc.contributor.authorBruno, Annalisaen_US
dc.contributor.authorFian, Alexanderen_US
dc.contributor.authorDimopoulos, Theodorosen_US
dc.contributor.authorTrimmel, Gregoren_US
dc.date.accessioned2020-05-21T04:56:31Z-
dc.date.available2020-05-21T04:56:31Z-
dc.date.issued2018-
dc.identifier.citationHoefler, S. F., Rath, T., Fischer, R., Latal, C., Hippler, D., Koliogiorgos, A., . . . Trimmel, G. (2018). A zero-dimensional mixed-anion hybrid halogenobismuthate(III) semiconductor : structural, optical, and photovoltaic properties. Inorganic Chemistry, 57(17), 10576-10586. doi:10.1021/acs.inorgchem.8b01161en_US
dc.identifier.issn0020-1669en_US
dc.identifier.urihttps://hdl.handle.net/10356/139718-
dc.description.abstractIn this contribution, we present the synthesis and characterization of the mixed-anion halogenobismuthate(III) (CH3NH3)6BiI5.22Cl3.78 (MBIC) as an alternative lead-free perovskite-type semiconductor, and discuss its optical, electronic, and photovoltaic properties in comparison to the methylammonium bismuth iodide (CH3NH3)3Bi2I9 (MBI) compound. The exchange of iodide with chloride during synthesis leads to the formation of an orthorhombic A6BX9-type crystal structure ( Cmma, No. 67) with isolated BiX6 octahedra and methylammonium chloride interlayers. The experimentally found optical indirect band gap of 2.25 eV is in good agreement with the calculated value of 2.50 eV derived from DFT simulations. The valence band maximum and the conduction band minimum were determined to be at -6.2 eV and -4.0 eV vs vacuum. Similar to MBI, thin films of MBIC are composed of microcrystalline platelets. Time-resolved photoluminescence measurements show electron transfer of MBIC to mesoporous TiO2. The photovoltaic behavior of both compounds is compared in solar cells with the following device architecture: glass/ITO/compact TiO2/mesoporous TiO2/MBIC or MBI/spiro-OMeTAD/Au. Despite the zero-dimensional structure of MBIC, a maximum power conversion efficiency of 0.18% and a high fill factor of almost 60% were obtained with this material as absorber layer. When stored under inert conditions, these solar cells show an excellent long-term stability over the investigated period of more than 700 days.en_US
dc.language.isoenen_US
dc.relation.ispartofInorganic Chemistryen_US
dc.rights© 2018 American Chemical Society. All rights reserved.en_US
dc.subjectScience::Chemistryen_US
dc.titleA zero-dimensional mixed-anion hybrid halogenobismuthate(III) semiconductor : structural, optical, and photovoltaic propertiesen_US
dc.typeJournal Articleen
dc.contributor.researchEnergy Research Institute @NTUen_US
dc.identifier.doi10.1021/acs.inorgchem.8b01161-
dc.identifier.pmid30129362-
dc.identifier.scopus2-s2.0-85053004296-
dc.identifier.issue17en_US
dc.identifier.volume57en_US
dc.identifier.spage10576en_US
dc.identifier.epage10586en_US
dc.subject.keywordsThin Filmsen_US
dc.subject.keywordsAnionsen_US
item.grantfulltextnone-
item.fulltextNo Fulltext-
Appears in Collections:ERI@N Journal Articles

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.