Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/139948
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSaengchairat, Nitiponen_US
dc.date.accessioned2020-05-22T13:18:50Z-
dc.date.available2020-05-22T13:18:50Z-
dc.date.issued2019-
dc.identifier.citationSaengchairat, N. (2019). Studies of suspension droplet evaporation on soft substrates for stretchable electronics applications. Doctoral thesis, Nanyang Technological University, Singapore.en_US
dc.identifier.urihttps://hdl.handle.net/10356/139948-
dc.description.abstractEvaporation of sessile drops is a common phenomenon in various problems, but its fundamental understanding remains modestly unknown. Despite numerous reports of the factors affecting the evaporation processes, the effect of substrate elastic modulus has been seldom reported. This work aims to experimentally investigate the dependence of substrate elastic modulus or Young modulus on the evaporation dynamics of the sessile liquid drops containing the dispersed microparticles and the resulting deposition patterns. In this work, the evaporation dynamics of the sessile ethanol drops was experimentally investigated using thermographic approach. As a result, the substrate Young modulus can control the evaporation dynamics and the radius of deposition patterns. The temperature distribution across the liquid-vapour interface deviates larger on the substrate with higher Young modulus. Moreover, the evaporation dynamics of water droplets containing non-spherical particles such as carbon nanotubes were analysed as a function of substrate temperature and particle concentration. The evaporation dynamics and the resulting deposition patterns are comparable to that of the spherical microparticles. In addition, the conductive patterns were directly printed on the surface of substrates with varying Young modulus. The properties of the printed patterns dependent of the substrate Young modulus were measured. It was demonstrated that the substrate with lower Young modulus could prevent the formation of sintered particles due to the leaching of residual polymers, therefore, suppressing their electrical conductivity. To conclude, the substrate Young modulus can notably control the evaporation dynamics and the properties of printed patterns.en_US
dc.language.isoenen_US
dc.publisherNanyang Technological Universityen_US
dc.rightsThis work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).en_US
dc.subjectEngineering::Mechanical engineering::Fluid mechanicsen_US
dc.titleStudies of suspension droplet evaporation on soft substrates for stretchable electronics applicationsen_US
dc.typeThesis-Doctor of Philosophyen_US
dc.contributor.supervisorTuan Tranen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeDoctor of Philosophyen_US
dc.contributor.researchSingapore Centre for 3D Printingen_US
dc.contributor.supervisoremailttran@ntu.edu.sgen_US
item.grantfulltextembargo_20201231-
item.fulltextWith Fulltext-
Appears in Collections:MAE Theses
Files in This Item:
File Description SizeFormat 
PhD Thesis - Saengchairat Nitipon.pdf
  Until 2020-12-31
6.09 MBAdobe PDFUnder embargo until Dec 31, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.