Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/140459
Title: Cesium-oleate passivation for stable provskite photovoltaics
Authors: Guo, Xintong
Koh, Teck Ming
Febriansyah, Benny
Han, Guifang
Bhaumik, Saikat
Li, Jia
Nur Fadilah Jamaludin
Ghosh, Biplab
Chen, Xiaodong
Mhaisalkar, Subodh
Mathews, Nripan
Keywords: Engineering
Science
Engineering::Materials
Issue Date: 2019
Source: Guo, X., Koh, T. M., Febriansyah, B., Han, G., Bhaumik, S., Li, J., . . . Mathews, N. (2019). Cesium oleate passivation for stable perovskite photovoltaics. ACS Applied Materials & Interfaces, 11(31), 27882–27889. doi:10.1021/acsami.9b08026
Journal: ACS Applied Materials & Interfaces
Abstract: Despite their emergence as promising materials for low-cost and efficient energy power generation technology, hybrid organ-ic-inorganic lead-halide perovskites’ instability towards moisture and heat stress remains a serious obstacle that needs to be tackled for commercialization. Here, we show improved moisture and thermal stability through the use of cesium oleate to modify the perovskite/hole transporting material (HTM) interface. Passivation using cesium oleate does not induce the for-mation of any low dimensional perovskites, suggesting that the organic species only passivates the perovskite’s surface and grain boundaries. As a result, enhanced hydrophobic character of perovskite film is realized upon passivation, evidenced by high water contact angle of 107.4 degree and improved stability at ambient condition (relative humidity of ~70%, room tem-perature). Concomitantly, the proposed passivation strategy leads to increased amount of cesium concentration within the films, resulting in beneficial enhanced thermal stability of the film at 85oC. By maintaining the three-dimensional (3D) structure of the solar absorber while concurrently passivating the interfacial defects and vacancies, improved open-circuit voltage (Voc) and unsacrificed short-circuit current density (Jsc) were obtained from the treated devices, leading to power conversion effi-ciencies of over 18%. When stored in a humid environment (relative humidity of ~55%), devices with cesium oleate passivation maintain 88% of its initial PCEs after 720 hours, degrading two times slower than those of the control. This work offers a strat-egy of coating 3D perovskites with unique combination of inorganic cation and long chain organics to provide hydrophobicity and moisture stability to the solar absorber layer, while maintaining good device performances.
URI: https://hdl.handle.net/10356/140459
ISSN: 1944-8244
DOI: 10.1021/acsami.9b08026
Rights: This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Applied Materials & Interfaces, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://doi.org/10.1021/acsami.9b08026.
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:IGS Journal Articles

Files in This Item:
File Description SizeFormat 
Cesium oleate passivtion for stable perovskite photovoltaics.pdf1.76 MBAdobe PDFView/Open

SCOPUSTM   
Citations

1
checked on Jun 24, 2020

WEB OF SCIENCETM
Citations

2
checked on Oct 20, 2020

Page view(s)

75
checked on Oct 24, 2020

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.