Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorWang, Jingjingen_US
dc.contributor.authorZhang, Mengen_US
dc.contributor.authorTan, Xipengen_US
dc.contributor.authorLiu, Tongen_US
dc.contributor.authorBi, Guijunen_US
dc.contributor.authorLi, Huaen_US
dc.contributor.authorTor, Shu Bengen_US
dc.contributor.authorLiu, Erjiaen_US
dc.identifier.citationWang, J., Zhang, M., Tan, X., Liu, T., Bi, G., Li, H., . . . Liu, E. (2020). Fatigue behavior of ASTM A131 EH36 steel samples additively manufactured with selective laser melting. Materials Science and Engineering: A, 777, 139049-. doi:10.1016/j.msea.2020.139049en_US
dc.description.abstractBy tuning the process parameters mainly scanning speed ASTM A131 EH36 steel samples with high strength (1000 MPa) and fair ductility (10%) were additively manufactured through a selective laser melting process. A dual phase structure consisting of recrystallized fine ferrite and highly tempered martensite (<30%) resulted from a lower laser scanning speed of 100 mm/s. The higher heat input incurred with lower scanning speed improved the densification of the built samples, which was beneficial for achieving enhanced mechanical properties. Fatigue life cycles of the samples built at lower scanning speeds surpassed those built at higher scanning speeds. Porosity induced failure was found to dominate the high cycle fatigue failure for all the samples printed, which was attributed to the ubiquitous distribution of the pores in large quantity and size with complex shapes. Grain orientation in the horizontally built samples favoured crack propagation in the early stage, which was believed to contribute to the lowered fatigue limit and life. The stable crack propagation and fast fracture regime were characterized by tearing topology surface and dimples, respectively, for the samples. The fatigue behavior of the printed EH36 steel samples was correlated to their microstructure as well as the printing process conditions. Soft phases such as retained austenite and coarsened ferrite, etc. may contribute to the fatigue behavior of the samples in certain aspect.en_US
dc.relation.ispartofMaterials Science and Engineering: Aen_US
dc.rights© 2020 Elsevier B.V. All rights reserved. This paper was published in Materials Science and Engineering: A and is made available with permission of Elsevier B.V.en_US
dc.subjectEngineering::Materials::Material testing and characterizationen_US
dc.subjectEngineering::Materials::Metallic materials::Alloysen_US
dc.titleFatigue behavior of ASTM A131 EH36 steel samples additively manufactured with selective laser meltingen_US
dc.typeJournal Articleen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.contributor.researchSingapore Centre for 3D Printingen_US
dc.contributor.researchSingapore Institute of Manufacturing Technologyen_US
dc.description.versionAccepted versionen_US
dc.subject.keywordsA131 EH36 Steelen_US
dc.subject.keywordsSelective Laser Meltingen_US
item.fulltextWith Fulltext-
Appears in Collections:MAE Journal Articles

Citations 20

Updated on Mar 19, 2023

Web of ScienceTM
Citations 20

Updated on Mar 26, 2023

Page view(s)

Updated on Mar 28, 2023

Download(s) 50

Updated on Mar 28, 2023

Google ScholarTM




Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.