Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/141107
Full metadata record
DC FieldValueLanguage
dc.contributor.authorDas, Shomiren_US
dc.date.accessioned2020-06-04T03:06:45Z-
dc.date.available2020-06-04T03:06:45Z-
dc.date.issued2020-
dc.identifier.urihttps://hdl.handle.net/10356/141107-
dc.description.abstractThis final year project includes a literature review on additive manufacturing processes, carbon fibre reinforced composites, and curing techniques for composite materials. The experiments conducted for the mechanical properties of the specimens are tensile and 3-point bending tests of the 3D printed composite specimens. The composite used is a carbon fibre reinforced plastic that consists of nylon and carbon fibre, called Onyx. There is limited research done on the Onyx material to date due to it being a relatively new production. This project aims to bridge this gap as well as provide research information for any future paper references. A hygrothermal study is also done in this project in order to evaluate if the specimens; and by extension the Onyx material, are affected by the addition of heat and moisture. Specimens were printed at a different angle to previous reports in order to evaluate if this new printing angle is more suited for the composite. 16 specimens were printed in total for this project, with 12 for bending test and 4 for tensile tests. Properties to be recorded from these tests were the respective strength and elastic moduli of the specimens. Theoretical calculations of these properties were also made for comparison purposes. Any potential errors or limitations, as well as suggestions for improvements, were also discussed in this paper.en_US
dc.language.isoenen_US
dc.publisherNanyang Technological Universityen_US
dc.relationB111en_US
dc.subjectEngineering::Materials::Composite materialsen_US
dc.subjectEngineering::Materials::Mechanical strength of materialsen_US
dc.subjectEngineering::Mechanical engineeringen_US
dc.titleMechanical and hygrothermal analysis of 3D printed carbon fibre reinforced plasticsen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorSeah Leong Keeyen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeBachelor of Engineering (Mechanical Engineering)en_US
dc.contributor.organizationChemtron Pte Ltden_US
dc.contributor.supervisoremailMLKSEAH@ntu.edu.sgen_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
MAE_U1721582L_SHOMIRDAS_FYP_REPORT.pdf
  Restricted Access
Final Year Report (FYP) for MAE undergraduate Shomir Das for the Academic Year 2019/2020. Report is on the Mechanical and Hygrothermal properties of the Carbon Fibre Reiforced Polymer (CFRP) material of Onyx.4.96 MBAdobe PDFView/Open

Page view(s)

307
Updated on Jul 17, 2024

Download(s)

16
Updated on Jul 17, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.