Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/141220
Title: Material characterization of additive manufactured parts for failure analysis and property improvement
Authors: Lee, Annabelle Yun Jin
Keywords: Engineering::Mechanical engineering
Issue Date: 2020
Publisher: Nanyang Technological University
Project: B198
Abstract: Selective Laser Melting (SLM) is a form of Additive Manufacturing (AM) that utilizes Powder Bed Fusion technology to melt atomized metallic powders to form 3-Dimensional parts. This technology allows the manufacturing of complex parts that eliminates material wastage. Although the technology is very advanced, there are instances where the part produced, its qualities might not be as desired. While a good set of process parameters are chosen for the building process, the parts will result in a significant variation of mechanical properties and the quality achieved. This brings up an issue where high-density parts produced are not consistent with every print. This project investigates the quality of parts that were built with the same process parameters and in the different sections of the SLM building chamber. Parts that were examined were prepared meticulously in order to obtain images and analysis at the micro level. This step will produce accurate results in the porosity and microstructure analysis which were done in order to identify the defects present in the parts and what factors could have caused it and to determine which section built the part with the highest density.
URI: https://hdl.handle.net/10356/141220
Schools: School of Mechanical and Aerospace Engineering 
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
FYP B198 Annabelle Lee Yun Jin Report.pdf
  Restricted Access
3.94 MBAdobe PDFView/Open

Page view(s)

194
Updated on Jun 25, 2024

Download(s)

13
Updated on Jun 25, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.