Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/141245
Title: Design and fabrication of electrically conductive elastomer
Authors: Wong, Bryan Min Jie
Keywords: Engineering::Mechanical engineering
Issue Date: 2020
Publisher: Nanyang Technological University
Project: A111
Abstract: Electrically conductive elastomers are widely used material in the electrical industry. There are many different kinds of electrically conductive elastomers, each with different kinds of conductive filler material. A conductive filler material varies in material, shapes and sizes. It is added to a non-conductive elastomer in impart electrical conductivity to the elastomer. Different amounts of filler material are added to improve the imparted electrical conductivity. The aim of this project is to investigate the impact of incorporating conducting wires on the surface and bulk electrical conductivities of a conductive silicone rubber. By incorporating copper wires of high aspect ratio with different configurations in between layers of silicone rubber to lower the percolation threshold, the material samples show that the there is a reduction in the resistance measurements. Furthermore, the electrical resistance of the material sample show that there is a slight reduction after the material sample undergo compression moulding.
URI: https://hdl.handle.net/10356/141245
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
Bryan Wong FYP Report Final.pdf
  Restricted Access
1.16 MBAdobe PDFView/Open

Page view(s)

193
Updated on Feb 7, 2023

Download(s)

10
Updated on Feb 7, 2023

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.