Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLow, Antheberther Hui Sien_US
dc.description.abstractThe objective of this project is to develop a program to extract the structural edges of a room from a 2-Dimensional (2-D)photograph. However, this was faced with initial complicationsas there is noise in everyphotograph. Therefore, we need to first address the core problem of edge detection, followed by the noises that comes with the photograph. The methodologyemployed is broken down into 4 main phases:pre-processing, finding the corners and everyline in the photograph, calculatingthe distance between everycorner point and the linesas well as the distance between the starting and ending points,and lastly displayingthe geometry structures.The program istested on an imageand the results show that most of the structural lines and corners were obtained. Theproblems andobstacles encountered were noises in the image, threshold used and methodology that was used previously.The future work includes improvisation or implementing more condition to the existing ones, smoothen the image for noise reduction and versatility of the program.en_US
dc.publisherNanyang Technological Universityen_US
dc.subjectEngineering::Mechanical engineeringen_US
dc.titleAccurate detection of the edges of a room in a photographen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorLee Yong Tsuien_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeBachelor of Engineering (Mechanical Engineering)en_US
item.fulltextWith Fulltext-
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
FYP report.pdf
  Restricted Access
1.94 MBAdobe PDFView/Open

Google ScholarTM


Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.