Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/142244
Title: Suppression of cutting forces using combined inverse model based disturbance observer and disturbance force observer
Authors: Madihah Maharof
Zamberi Jamaludin
Mohammad Minhat
Lokman Abdullah
Nur Amira Anang
Chiew, Tsung Heng
Jailani Jamaludin
Tjahjowidodo, Tegoeh
Keywords: Engineering::Mechanical engineering
Issue Date: 2018
Source: Madihah Maharof, Zamberi Jamaludin, Mohammad Minhat, Lokman Abdullah, Nur Amira Anang, Chiew, T. H., . . . Tjahjowidodo, T. (2018). Suppression of cutting forces using combined inverse model based disturbance observer and disturbance force observer. Journal of Advanced Manufacturing Technology, 12(1(3)), 73-86.
Journal: Journal of Advanced Manufacturing Technology
Abstract: This paper focuses on damping strategies that addressed the effect that high frequency harmonics content of cutting force have on positioning accuracy of the x-axis of an XY positioning table via controller and observer design approaches. Cutting force generated from direct contact between the workpiece and cutting tool becomes input disturbance to the drive system of the positioning table. The force high frequency components if left undamped would generate vibration to the system thus affecting the system positioning accuracy, surface finish quality as well as tool life. For this purpose, a cascade P/PI position controller, an Inverse Model Based Disturbance Observer (IMBDO) and a Disturbance Force Observer (DFO) were designed and numerically analysed. The cascade P/PI controller was designed using traditional loop shaping frequency domain method. IMBDO estimates the input disturbance and any unmodelled system dynamics while DFO performs direct estimation of the cutting force using knowledge of harmonic frequencies corresponding to the input cutting force. A combined cascade P/PI controller with IMBDO and DFO reduced additional 3.83% and 1.90% tracking errors compared to separate application of IMBDO and DFO. This novel control approach produced between 34-80% greater reductions in peak amplitudes of the harmonics content of the cutting forces compared to cascade P/PI.
URI: https://jamt.utem.edu.my/jamt/article/view/4881
https://hdl.handle.net/10356/142244
ISSN: 1985-3157
Rights: © 2018 The Author(s) (published by Journal of Advanced Manufacturing Technology). This is an open-access article distributed under the terms of the Creative Commons Attribution License.
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:MAE Journal Articles

Files in This Item:
File Description SizeFormat 
document.pdf2.03 MBAdobe PDFView/Open

Page view(s)

52
Updated on May 25, 2022

Download(s) 50

19
Updated on May 25, 2022

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.