Please use this identifier to cite or link to this item:
|Title:||Controllable mullite bismuth ferrite micro/nanostructures with multifarious catalytic activities for switchable/hybrid catalytic degradation processes||Authors:||Hu, Zhong-Ting
|Keywords:||Engineering::Civil engineering||Issue Date:||2018||Source:||Hu, Z.-T., Oh, W.-D., Liu, Y., Yang, E.-H., & Lim, T.-T. (2018). Controllable mullite bismuth ferrite micro/nanostructures with multifarious catalytic activities for switchable/hybrid catalytic degradation processes. Journal of colloid and interface science, 509, 502-514. doi:10.1016/j.jcis.2017.09.035||Journal:||Journal of colloid and interface science||Abstract:||In this work, controllable preparation of micro/nanostructured bismuth ferrites (BFOs) were used to investigate multifarious heterogeneous catalyses, including Fenton/Fenton-like reaction, photocatalysis, photo-Fenton oxidation, and peroxymonosulfate (PMS) activation. Results showed that BFO can be used asa novel catalyst to activate switchable catalytic degradation of organic matters. Additionally, a novel catalytic system for degradation of organic pollutants, which integrating all-above heterogeneous catalyses is denoted as BFO/H2O2/PMS hybrid reaction, is introduced for the first time. BFO/H2O2/PMS system effectively degraded>99% for both methyl orange (MO) and sulfamethoxazole (SMX) within 60min, which shows better efficiency than above BFO-driven catalyses. The major SMX degradation pathway in BFO/H2O2/PMS system is proposed via detecting intermediates using LC/MS/MS. It was found that catalytic activities of BFOs are in the order of BFO-L (co-precipitation, micro/nanosize, single crystals exposing facet (001))>BFO-H (hydrothermal, nanocluster with a higher surface area than other BFOs)>BFO-C (fabricated using calcination process, microsize), which demonstrated that crystallographic orientation is more significant in heterogeneous catalyses than specific surface area at micro/nanoscale. Besides, the required H2O2 consumption for achieving 99% TOC removal was identified in BFO-driven photo-Fenton oxidation. The other effects on degradation efficiency, such as H2O2 dosage and pH, were investigated as well. In Fenton/Fenton-like reaction, reaction conditions suggested are ∼61.5mM H2O2 dosage and pH≥4.5 to avoid quenching of HO into HO2 by excessive H2O2 and Fe leaching.||URI:||https://hdl.handle.net/10356/142544||ISSN:||0021-9797||DOI:||10.1016/j.jcis.2017.09.035||Rights:||© 2017 Elsevier Inc. All rights reserved.||Fulltext Permission:||none||Fulltext Availability:||No Fulltext|
|Appears in Collections:||NEWRI Journal Articles|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.