Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/142888
Title: QoS-driven optimized design-based integrated visible light communication and positioning for indoor IoT networks
Authors: Yang, Helin
Zhong, Wen-De
Chen, Chen
Alphones, Arokiaswami
Du, Pengfei
Keywords: Engineering::Electrical and electronic engineering
Issue Date: 2019
Source: Yang, H., Zhong, W.-D., Chen, C., Alphones, A., & Du, P. (2020). QoS-driven optimized design-based integrated visible light communication and positioning for indoor IoT networks. IEEE Internet of Things Journal, 7(1), 269-283. doi:10.1109/JIOT.2019.2951396
Journal: IEEE Internet of Things Journal
Abstract: With the rapid development of the Internet of Things (IoT) in the smart city, smart grid, and smart industry, indoor communication and positioning are important for IoT. However, radio-frequency (RF)-based wireless networks may fail to guarantee different quality-of-service (QoS) requirements of devices, due to the limited bandwidth, severe interference, and multipath reflections. Hence, this article presents a new integrated visible light communication (VLC) and VLC positioning (VLCP) network for IoT to provide both high-speed communication and high-accuracy positioning services. As the network consists of multiple VLC access points (APs), we propose jointly optimizing the AP selection, bandwidth allocation, adaptive modulation, and power allocation approach to satisfy different QoS requirements of indoor devices while maximizing the network data rate. A low-complexity iterative algorithm is presented to solve the resource management (RM) optimization problem by decomposing it into two subproblems. Finally, a robust handover mechanism and a pedestrian dead reckoning (PDR)-assisted VLCP scheme are presented to maintain good performance under line-of-sight (LOS) blockages. The simulation results verify that the proposed solutions outperform other existing solutions in terms of effectively enhancing the data rate, improving the positioning accuracy, and guaranteeing devices' QoS requirements. In detail, the mean position error is reduced from 20 to 4.3 cm by using our presented integrated VLCP model. The proposed RM approach achieves a satisfied QoS level improvement of up to 20.3% compared with the non-QoS-driven RM approach, and it achieves the high data rate up to 1.31 Gb/s.
URI: https://hdl.handle.net/10356/142888
ISSN: 2327-4662
DOI: 10.1109/JIOT.2019.2951396
Rights: © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The published version is available at: https://doi.org/10.1109/JIOT.2019.2951396
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:EEE Journal Articles

PublonsTM
Citations 20

5
Updated on Mar 4, 2021

Page view(s)

67
Updated on May 6, 2021

Download(s)

15
Updated on May 6, 2021

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.