Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/143121
Title: 3D printed bio-models for medical applications
Authors: Yap, Yee Ling
Tan, Edgar Yong Sheng
Tan, Joel Heang Kuan
Peh, Zhen Kai
Low, Xue Yi
Yeong, Wai Yee
Tan, Colin Siang Hui
Laude, Augustinus
Keywords: Engineering::Mechanical engineering
Issue Date: 2017
Source: Yap, Y. L., Tan, E. Y. S., Tan, J. H. K., Peh, Z. K., Low, X. Y., Yeong, W. Y., . . . Laude, A. (2017). 3D printed bio-models for medical applications. Rapid Prototyping Journal, 23(2), 227-235. doi:10.1108/rpj-08-2015-0102
Journal: Rapid Prototyping Journal
Abstract: Purpose - The design process of a bio-model involves multiple factors including data acquisition technique, material requirement, resolution of the printing technique,cost effectiveness of the printing process and end use requirements.This paper aims to compare and highlight the effects of these design factors on the printing outcome of bio-models. Design/methodology/approach - Different data sources including engineering drawing, computed tomography (CT), and optical coherence tomography (OCT) were converted to a printable data format. Three different bio-models, namely, an ophthalmic model, a retina model and a distal tibia model, were printed using two different techniques, namely, PolyJet and fused deposition modelling. The process flow and 3D printed models were analysed. Findings - The data acquisition and 3D printing process affect the overall printing resolution. The design process flows using different data sources were established and the bio-models were printed successfully. Research limitations/implications - Data acquisition techniques contained inherent noise data and resulted in inaccuracies during data conversion. Originality/value - This work showed that the data acquisition and conversion technique had a significant effect on the quality of the bio-model blueprint and subsequently the printing outcome. In addition, important design factors of bio-models were highlighted such as material requirement and the cost-effectiveness of the printing technique. This paper provides a systematic discussion for future development of an engineering design process in three-dimensional (3D) printed bio-models.
URI: https://hdl.handle.net/10356/143121
ISSN: 1355-2546
DOI: 10.1108/RPJ-08-2015-0102
Rights: © 2017 Emerald Publishing Limited. All rights reserved. This paper was published in Rapid Prototyping Journal and is made available with permission of Emerald Publishing Limited.
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:MAE Journal Articles

Files in This Item:
File Description SizeFormat 
RPJ 3D Printed Bio-model Accepted Manuscript.pdf1.02 MBAdobe PDFView/Open

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.