Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/144578
Title: Experimental and numerical investigation of forced convection heat transfer in porous lattice structures produced by selective laser melting
Authors: Ho, Jin Yao
Leong, Kai Choong
Wong, Teck Neng
Keywords: Engineering::Mechanical engineering
Issue Date: 2018
Source: Ho, J. Y., Leong, K. C., & Wong, T. N. (2019). Experimental and numerical investigation of forced convection heat transfer in porous lattice structures produced by selective laser melting. International Journal of Thermal Sciences, 137, 276-287. doi:10.1016/j.ijthermalsci.2018.11.022
Journal: International Journal of Thermal Sciences 
Abstract: Forced convection heat transfer in four structured porous materials produced by selective laser melting (SLM) was experimentally and numerically studied. The porous materials are lattice structures consisting of periodic arrangements of Rhombi-Octet unit cells. The lattice structures have similar porosity (ε) but are of different unit cell sizes of 5 mm, 7 mm, 10 mm and 12 mm. This investigation aims to characterize and evaluate the thermo-hydraulic properties of this new class of lattice structures. The hydrodynamic and heat transfer characteristics of the lattices structures such as the permeability (K), inertia coefficient (CE) and Nusselt number (Nu) were determined experimentally in an air flow channel in which the Reynolds number (Re) can be varied between 1300 and 7000. Using a linear heat conduction setup, the stagnant effective thermal conductivities (keff) of the various lattice structures were determined and a relationship between keff and the ligament width (d) of the lattice structure was obtained. Based on the local thermal non-equilibrium model, numerical simulations were performed to determine the interfacial heat transfer coefficients (hsf) of the lattice structures. Our results showed that the pressure drop (ΔP) and Nusselt number (Nu) of the lattice structures increase with decreasing d and the highest Nu of 906 was obtained with the L1 lattice structure which has the smallest ligament width. The lattice structures also exhibited high keff values which were up to 5.5 times higher than that of the aluminum foams. Due to the orderly arrangements of the lattice structures, their permeability-based friction factors (f⋅Da1/2) were found to be lower than the metallic foams. However, their hsf values were also lower. The Colburn j-factor and thermal efficiency index (η) of the lattice structures were determined and found to be higher than those of the commercial metallic foams and conventional pin fin heat sinks. In summary, this investigation demonstrates the promising use of a new class of lattice structures (Rhombi-Octet) for enhancing single-phase forced convection cooling.
URI: https://hdl.handle.net/10356/144578
ISSN: 1290-0729
DOI: 10.1016/j.ijthermalsci.2018.11.022
Rights: © 2018 Elsevier Masson SAS. All rights reserved. This paper was published in International Journal of Thermal Sciences and is made available with permission of Elsevier Masson SAS.
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:MAE Journal Articles
SC3DP Journal Articles

SCOPUSTM   
Citations 20

13
Updated on Apr 28, 2021

PublonsTM
Citations 20

10
Updated on Apr 24, 2021

Page view(s)

189
Updated on Jul 3, 2022

Download(s) 50

87
Updated on Jul 3, 2022

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.