Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/146631
Full metadata record
DC FieldValueLanguage
dc.contributor.authorTay, Daniel Yi Weien_US
dc.contributor.authorPanda, Biranchien_US
dc.contributor.authorQian, Yeen_US
dc.contributor.authorTan, Ming Jenen_US
dc.date.accessioned2021-03-03T08:03:44Z-
dc.date.available2021-03-03T08:03:44Z-
dc.date.issued2018-
dc.identifier.citationTay, D. Y. W., Panda, B., Qian, Y. & Tan, M. J. (2018). Progress in construction automation : review on 3D printing of concrete materials. 1st International Conference on 3D Construction Printing (3DcP), 1-11.en_US
dc.identifier.urihttps://hdl.handle.net/10356/146631-
dc.description.abstract3D Printing or additive manufacturing has been gaining popularity in the concrete research community and the field. Compared with conventional vibrating concrete or self- consolidating concrete, 3D printing technique do not require formwork, which is labor intensive and costly in construction sites. With the advantages in depositing the materials freely, 3D printing technique could construct more complicated structures at lower cost. In the past 4 years, the building and construction group at Singapore Centre for 3D Printing (SC3DP, NTU) has done a series of studies on concrete 3D printing. Presented in this paper are the overview of the current research at SC3DP focusing on 3D concrete printing with consideration in materials, machines and design. Conventional cementitious materials have been printed, including mixtures with supplementary cementitious materials (SCM), admixtures, recycled glass as aggregates, as well as geopolymer. Stainless steel cable and various types of fibres have also been incorporated to strengthen the cementitious mixtures. The interlayer bonding was studied and improved with novel nozzle design and a good balance between printing and pumping speed. Architecture design is further adapted considering the features of 3D printing technique, thus yielding some unique structures with optimized geometries.en_US
dc.description.sponsorshipNational Research Foundation (NRF)en_US
dc.language.isoenen_US
dc.rights© 2018 RILEM publications. All rights reserved.This paper was published in Proceedings of 1st International Conference on 3D Construction Printing (3DcP) and is made available with permission of RILEM publications.en_US
dc.subjectEngineering::Mechanical engineeringen_US
dc.titleProgress in construction automation : review on 3D printing of concrete materialsen_US
dc.typeConference Paperen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.contributor.conference1st International Conference on 3D Construction Printing (3DcP)en_US
dc.contributor.researchSingapore Centre for 3D Printingen_US
dc.description.versionAccepted versionen_US
dc.identifier.spage1en_US
dc.identifier.epage11en_US
dc.subject.keywordsConcrete 3D Printingen_US
dc.subject.keywords3D Printable Materialen_US
dc.citation.conferencelocationSwinburne University of Technology, Melbourne, Australiaen_US
dc.description.acknowledgementThe authors would like to acknowledge SempCorp Design & Construction Pte Ltd and National Research Foundation (NRF), Singapore for funding and support.en_US
item.grantfulltextopen-
item.fulltextWith Fulltext-
Appears in Collections:MAE Conference Papers
SC3DP Conference Papers
Files in This Item:
File Description SizeFormat 
PROGRESS IN CONSTRUCTION AUTOMATION.pdf746.81 kBAdobe PDFThumbnail
View/Open

Page view(s)

191
Updated on May 28, 2022

Download(s)

15
Updated on May 28, 2022

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.