Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/147373
Full metadata record
DC FieldValueLanguage
dc.contributor.authorZhu, Meijiaoen_US
dc.contributor.authorYuan, Y. F.en_US
dc.contributor.authorYin, Si Minen_US
dc.contributor.authorYu, Gao Hongen_US
dc.contributor.authorGuo, Shao Yien_US
dc.contributor.authorHuang, Yi Zhongen_US
dc.contributor.authorDu, Cui Weien_US
dc.date.accessioned2021-03-30T05:37:53Z-
dc.date.available2021-03-30T05:37:53Z-
dc.date.issued2019-
dc.identifier.citationZhu, M., Yuan, Y. F., Yin, S. M., Yu, G. H., Guo, S. Y., Huang, Y. Z. & Du, C. W. (2019). Corrosion behavior of pipeline steel with different microstructures under AC interference in acid soil simulation solution. Journal of Materials Engineering and Performance, 28(3), 1698-1706. https://dx.doi.org/10.1007/s11665-019-03929-zen_US
dc.identifier.issn1059-9495en_US
dc.identifier.urihttps://hdl.handle.net/10356/147373-
dc.description.abstractCorrosion behavior of X65 pipeline steels with different microstructures under alternating current (AC) interference was investigated in acid soil simulation solution by potentiodynamic polarization curve, potentiostatic polarization curve and immersion test. The results show that superimposed AC causes a sharp increase in corrosion current density of X65 steel. With the increase in i , the corrosion current densities of steels with various microstructures increase, especially at high i . Hot-rolled steel mainly experiences uniform corrosion, with very slight pit corrosion. Serious corrosion degrees with intensive corrosion pits can be observed on the surfaces of normalized and quenched microstructure steels. The annealed steel exhibits the feature of non-uniform corrosion with some pitting. The steels with various microstructures applied with AC have different corrosion resistance. The normalized steel shows the worst corrosion resistance, then the quenched microstructure, and the hot-rolled steel displays the optimum corrosion resistance. The difference in the microstructure can result in difference in corrosion degree and occurrence position of pitting corrosion of X65 steel. The normalized microstructure composed of polygonal ferrite and a large amount of pearlite and bainite is the most susceptible to AC corrosion. AC ACen_US
dc.language.isoenen_US
dc.relation.ispartofJournal of Materials Engineering and Performanceen_US
dc.rights© 2019 ASM International. All rights reserved.en_US
dc.subjectEngineering::Materialsen_US
dc.titleCorrosion behavior of pipeline steel with different microstructures under AC interference in acid soil simulation solutionen_US
dc.typeJournal Articleen
dc.contributor.schoolSchool of Materials Science and Engineeringen_US
dc.identifier.doi10.1007/s11665-019-03929-z-
dc.identifier.scopus2-s2.0-85061627145-
dc.identifier.issue3en_US
dc.identifier.volume28en_US
dc.identifier.spage1698en_US
dc.identifier.epage1706en_US
dc.subject.keywordsAC Interferenceen_US
dc.subject.keywordsMicrostructureen_US
dc.description.acknowledgementThis work was supported by the National Natural Science Foundation of China, the Natural Science Foundation of Zhejiang Province (No. LY18E010004) and the National R&D Infrastructure and Facility Development Program of China (No. 2005DKA10400).en_US
item.grantfulltextnone-
item.fulltextNo Fulltext-
Appears in Collections:MSE Journal Articles

Page view(s)

135
Updated on Aug 7, 2022

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.