Please use this identifier to cite or link to this item:
https://hdl.handle.net/10356/147899Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | Zhou, Xinran | en_US |
| dc.contributor.author | Lee, Pooi See | en_US |
| dc.date.accessioned | 2021-04-23T02:22:49Z | - |
| dc.date.available | 2021-04-23T02:22:49Z | - |
| dc.date.issued | 2021 | - |
| dc.identifier.citation | Zhou, X. & Lee, P. S. (2021). Three-dimensional printing of tactile sensors for soft robotics. MRS Bulletin, 46. https://dx.doi.org/10.1557/s43577-021-00079-3 | en_US |
| dc.identifier.issn | 1938-1425 | en_US |
| dc.identifier.uri | https://hdl.handle.net/10356/147899 | - |
| dc.description.abstract | Three-dimensional (3D) printing has become an important fabrication method for soft robotics, due to its ability to make complex 3D structures from computer designs in simple steps and multimaterial co-deposition ability. In this article, the application of 3D printing techniques in the fabrication of four types of tactile sensors commonly used in soft robotics, including the piezoresistive tactile sensor, capacitive tactile sensor, piezoelectric tactile sensor, and triboelectric tactile sensor, will be discussed. The 3D printing mechanism, material, and structure for each type of sensor will be introduced, and the perspectives on the future potential of 3D printable tactile sensors will be discussed. | en_US |
| dc.description.sponsorship | National Research Foundation (NRF) | en_US |
| dc.language.iso | en | en_US |
| dc.relation.ispartof | MRS Bulletin | en_US |
| dc.rights | © 2021 The Author(s). This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. | en_US |
| dc.subject | Engineering::Materials::Microelectronics and semiconductor materials | en_US |
| dc.title | Three-dimensional printing of tactile sensors for soft robotics | en_US |
| dc.type | Journal Article | en |
| dc.contributor.school | School of Materials Science and Engineering | en_US |
| dc.identifier.doi | 10.1557/s43577-021-00079-3 | - |
| dc.description.version | Published version | en_US |
| dc.identifier.volume | 46 | en_US |
| dc.subject.keywords | 3D Printing | en_US |
| dc.subject.keywords | Tactile Sensor | en_US |
| dc.description.acknowledgement | This work was supported by the National Research Foundation Investigatorship (Award No. NRF-NRFI2016-05), and Campus for Research Excellence and Technological Enterprise (CREATE) that is supported by the National Research Foundation, Prime Minister’s Office, Singapore. | en_US |
| item.grantfulltext | open | - |
| item.fulltext | With Fulltext | - |
| Appears in Collections: | MSE Journal Articles | |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| Zhou-Lee2021_Article_Three-dimensionalPrintingOfTac.pdf | 1.75 MB | Adobe PDF | View/Open |
Page view(s)
193
Updated on Jul 2, 2022
Download(s) 50
31
Updated on Jul 2, 2022
Google ScholarTM
Check
Altmetric
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.