Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/149113
Title: Development of a stair climbing machine
Authors: Lim, Joshua Pin Quan
Keywords: Engineering::Mechanical engineering
Issue Date: 2021
Publisher: Nanyang Technological University
Source: Lim, J. P. Q. (2021). Development of a stair climbing machine. Final Year Project (FYP), Nanyang Technological University, Singapore. https://hdl.handle.net/10356/149113
Project: A028
Abstract: This project proposes an innovative design and fabrication of a portable stair climbing robot that can assist humans by carrying their loads, such as luggage and suitcases, up and down the stairs. Over the course of this project, the Solidworks program was used extensively in the designing phase while items were purchased off the shelf as well as manufactured in NTU’s Innovation Lab and Manufacturing Process Labs for the manufacturing phase. The remote-controlled prototype was then assembled together and tested. The prototype was able to climb 3 steps but was unable to continue further, being limited by its tracks. The conclusion drawn from the project is that the basic geometry and design of the stair-climber is feasible, and it possesses the ability to climb stairs. The prototype, however, requires further modifications to produce a fully functional stair-climbing prototype that is able to climb higher and more consistently.
URI: https://hdl.handle.net/10356/149113
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
A028 - Development of a Stair Climbing Machine - Lim Pin Quan Joshua.pdf
  Restricted Access
Development of a Stair Climbing Machine5.24 MBAdobe PDFView/Open

Page view(s)

95
Updated on Jan 22, 2022

Download(s)

6
Updated on Jan 22, 2022

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.