Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/150119
Full metadata record
DC FieldValueLanguage
dc.contributor.authorGoh, Bjorn Kai Wenen_US
dc.date.accessioned2021-05-21T08:46:26Z-
dc.date.available2021-05-21T08:46:26Z-
dc.date.issued2021-
dc.identifier.citationGoh, B. K. W. (2021). Experimental investigations of hot-rolled stainless steel channel sections under combined loading. Final Year Project (FYP), Nanyang Technological University, Singapore. https://hdl.handle.net/10356/150119en_US
dc.identifier.urihttps://hdl.handle.net/10356/150119-
dc.description.abstractHot-rolled stainless steel structural sections are being manufactured at a lower cost due to the advancement in the metallurgical and hot-rolling fabrication methods in the recent years. In addition, hot-rolled stainless steel channel sections have an appealing resistance due to the attractive combination of material property (e.g. high strength and stiffness, large corrosion resistance, favourable strain hardening). Considering that the research for hot-rolled stainless steel channel sections under combined loading remains limited, an overall experimental programme including initial local imperfection measurements and ten stub columns under combined compression and major axis bending moment and ten stub columns under combined compression and minor axis bending moment, was conducted to investigate the cross-section ultimate resistance of hot-rolled stainless steel channel sections under combined loading about both major and minor principal axis. The collected experimental data including load–mid-height lateral deflection curves, failure loads and deformed failure modes were used to assess the accuracy and consistency of current Eurocode design rules, revealing that the current design code yields rather conservative and scattered resistance predictions for stainless steel channel sections under combined loading; this can be attributed to the fact that the favourable strain hardening exhibited by stainless steel is not considered in the European code.en_US
dc.language.isoenen_US
dc.publisherNanyang Technological Universityen_US
dc.subjectEngineering::Civil engineeringen_US
dc.titleExperimental investigations of hot-rolled stainless steel channel sections under combined loadingen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorZhao Ouen_US
dc.contributor.schoolSchool of Civil and Environmental Engineeringen_US
dc.description.degreeBachelor of Engineering (Civil)en_US
dc.contributor.supervisoremailou.zhao@ntu.edu.sgen_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:CEE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
FYP BJORN GOH KAI WEN U1722916B.pdf
  Restricted Access
1.25 MBAdobe PDFView/Open

Page view(s)

196
Updated on Jul 1, 2022

Download(s)

11
Updated on Jul 1, 2022

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.