Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/150419
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSong, Yujieen_US
dc.contributor.authorChen, Xuelongen_US
dc.contributor.authorLiang, Yen Nanen_US
dc.contributor.authorZhang, Liyingen_US
dc.contributor.authorLiu, Mingen_US
dc.contributor.authorHu, Xiaoen_US
dc.date.accessioned2021-08-04T08:47:52Z-
dc.date.available2021-08-04T08:47:52Z-
dc.date.issued2019-
dc.identifier.citationSong, Y., Chen, X., Liang, Y. N., Zhang, L., Liu, M. & Hu, X. (2019). Bio-inspired reinforcement of cyclosiloxane hybrid polymer via ‘molecular stitching’. Chemical Engineering Journal, 368, 573-576. https://dx.doi.org/10.1016/j.cej.2019.02.184en_US
dc.identifier.issn1385-8947en_US
dc.identifier.other0000-0001-9600-8530-
dc.identifier.other0000-0002-3243-700X-
dc.identifier.urihttps://hdl.handle.net/10356/150419-
dc.description.abstractCyclosiloxane hybrid polymer (CHP) was identified as a nacre-like structure, and was reinforced in a bio-inspired way through the incorporation of soft PDMS segment. Simultaneous improvement in both toughness and strength was observed, and the corresponding reinforcing mechanism was proposed to explain this phenomenon. It is believed that PDMS exited as two phases in the CHP. The homogeneously dispersed PDMS chains contribute positively to both the toughness and the strength via ‘molecular stitching', the phase separated PDMS particles improve the toughness but deteriorate the strength. Other types of siloxane-based additives were incorporated to prove the mechanism proposed.en_US
dc.description.sponsorshipNanyang Technological Universityen_US
dc.language.isoenen_US
dc.relationM4061124en_US
dc.relation.ispartofChemical Engineering Journalen_US
dc.rights© 2019 Published by Elsevier B.V. All rights reserved.en_US
dc.subjectEngineering::Materialsen_US
dc.titleBio-inspired reinforcement of cyclosiloxane hybrid polymer via ‘molecular stitching’en_US
dc.typeJournal Articleen
dc.contributor.schoolSchool of Materials Science and Engineeringen_US
dc.contributor.researchTemasek Laboratories @ NTUen_US
dc.identifier.doi10.1016/j.cej.2019.02.184-
dc.identifier.scopus2-s2.0-85062187214-
dc.identifier.volume368en_US
dc.identifier.spage573en_US
dc.identifier.epage576en_US
dc.subject.keywordsBio-inspireden_US
dc.subject.keywordsSimultaneous Reinforcementen_US
dc.description.acknowledgementThe authors would like to acknowledge the funding supported by Nanyang Technological University (NTU) with the grant number M4061124 and the support from School of Materials Science and Engineering NTU on the present work.en_US
item.fulltextNo Fulltext-
item.grantfulltextnone-
Appears in Collections:TL Journal Articles

Page view(s)

121
Updated on May 21, 2022

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.