Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/150548
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBhattarai, Arjunen_US
dc.contributor.authorWai, Nyunten_US
dc.contributor.authorSchweiss, Rüdigeren_US
dc.contributor.authorWhitehead, Adamen_US
dc.contributor.authorScherer, Günther G.en_US
dc.contributor.authorGhimire, Purna Chandraen_US
dc.contributor.authorLim, Tuti Marianaen_US
dc.contributor.authorHng, Huey Hoonen_US
dc.date.accessioned2021-06-07T03:03:09Z-
dc.date.available2021-06-07T03:03:09Z-
dc.date.issued2019-
dc.identifier.citationBhattarai, A., Wai, N., Schweiss, R., Whitehead, A., Scherer, G. G., Ghimire, P. C., Lim, T. M. & Hng, H. H. (2019). Vanadium redox flow battery with slotted porous electrodes and automatic rebalancing demonstrated on a 1 kW system level. Applied Energy, 236, 437-443. https://dx.doi.org/10.1016/j.apenergy.2018.12.001en_US
dc.identifier.issn0306-2619en_US
dc.identifier.urihttps://hdl.handle.net/10356/150548-
dc.description.abstractCapacity loss due to electrolyte crossover through the membrane and pump losses due to pressure drop at the porous electrodes are widely known issues in vanadium redox flow batteries during operation. In commercial systems, these losses account for a significant reduction in the overall efficiency. Previous studies have been focused on the development of new membranes to solve the capacity loss, and design modification to reduce the pressure drop. In this work, we propose unique solutions to solve both problems and are demonstrated in a multi-cell stack for the first time. A 20-cell, 1 kW vanadium redox flow battery stack was assembled using thin bipolar plates and porous electrodes featuring interdigitated flow channels. Such a stack design is novel of its kind and can mitigate various problems associated with flow distribution and pump power in flow batteries. In addition, the electrolyte tanks were shunted together to rebalance the electrolyte automatically. The stack showed a very good and stable performance with an energy efficiency of 80.5% at a current density of 80 mA cm−2. The use of hydraulic shunt resulted in a constant capacity over 250 cycles while the use of flow channels on the porous electrodes resulted in ∼40% reduction in pressure drop, compared to a stack with standard felts. The reduction in pressure drop by employing flow channels reduced the pump power proportionally. Overall, capacity retention and utilization of active materials have been improved substantially. These methods are simple and applicable to any size of vanadium redox flow battery.en_US
dc.language.isoenen_US
dc.relation.ispartofApplied Energyen_US
dc.rights© 2018 Elsevier Ltd. All rights reserved.en_US
dc.subjectEngineering::Materialsen_US
dc.titleVanadium redox flow battery with slotted porous electrodes and automatic rebalancing demonstrated on a 1 kW system levelen_US
dc.typeJournal Articleen
dc.contributor.schoolInterdisciplinary Graduate School (IGS)en_US
dc.contributor.schoolSchool of Civil and Environmental Engineeringen_US
dc.contributor.schoolSchool of Materials Science and Engineeringen_US
dc.contributor.researchEnergy Research Institute @ NTU (ERI@N)en_US
dc.identifier.doi10.1016/j.apenergy.2018.12.001-
dc.identifier.scopus2-s2.0-85057754966-
dc.identifier.volume236en_US
dc.identifier.spage437en_US
dc.identifier.epage443en_US
dc.subject.keywordsVanadium Redox Flow Batteryen_US
dc.subject.keywords1 kW Stacken_US
item.grantfulltextnone-
item.fulltextNo Fulltext-
Appears in Collections:ERI@N Journal Articles

Page view(s)

126
Updated on May 25, 2022

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.