Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/150666
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKamaraj, Ramaiahen_US
dc.date.accessioned2021-06-15T00:12:23Z-
dc.date.available2021-06-15T00:12:23Z-
dc.date.issued2021-
dc.identifier.citationKamaraj, R. (2021). Effect of ovality of shaft/hole on interference fits between shaft and hole. Final Year Project (FYP), Nanyang Technological University, Singapore. https://hdl.handle.net/10356/150666en_US
dc.identifier.urihttps://hdl.handle.net/10356/150666-
dc.description.abstractMechanical joints are very important to many mechanical mechanisms and machines. Among all the different types of fits used for mechanical joints, interference fit is quite unique in the sense that no additional components or parts are needed (as in bolted/rivetted joints) to hold the two given parts (shaft and bush) together. They are even used in important aircraft assemblies. There are many publications in the literature that study the stress distribution due to interference fit. Most of these studies do not consider geometrical error, such as ovality. This project considers ovality of the shaft in a shaft-bush assembly. For this study, ANSYS software is used to carry out finite element analysis on a typical shaft-bush assembly. A previous project has carried out ovality with medium sized mesh and has also validated theoretical results with ANSYS simulation results. This project extends by using greater variation of ovality, as well as interference fit. The results show that ovality does have significant effect on stresses on the bush, which is much more significant than the effect of interference fit.en_US
dc.language.isoenen_US
dc.publisherNanyang Technological Universityen_US
dc.relationP-B033en_US
dc.subjectEngineering::Mechanical engineeringen_US
dc.titleEffect of ovality of shaft/hole on interference fits between shaft and holeen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorSellakkutti Rajendranen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeBachelor of Engineering (Mechanical Engineering)en_US
dc.contributor.supervisoremailMSRajendran@ntu.edu.sgen_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
FYP REPORT FINAL_RAMAIAH KAMARAJ.pdf
  Restricted Access
2.11 MBAdobe PDFView/Open

Page view(s)

47
Updated on Oct 16, 2021

Download(s)

2
Updated on Oct 16, 2021

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.