Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/150674
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSim, Elton Ji Longen_US
dc.date.accessioned2021-06-02T02:26:21Z-
dc.date.available2021-06-02T02:26:21Z-
dc.date.issued2021-
dc.identifier.citationSim, E. J. L. (2021). Control of microfluidics channel geometries using temperature-responsive hydrogel. Final Year Project (FYP), Nanyang Technological University, Singapore. https://hdl.handle.net/10356/150674en_US
dc.identifier.urihttps://hdl.handle.net/10356/150674-
dc.description.abstractSpiral inertial microfluidics is a membrane-free technique for cells separation based on hydrodynamic forces. These devices typically require specific channel dimensions for different target cells separation, and laborious fabrication processes have to be repeated for optimization. Therefore, microfluidic devices with tunable channel dimensions would significantly reduce labor and cost as they can be controlled to cater for a larger size range of cell separation. This thesis proposes a novel fabrication method for tunable microfluidic devices using thermo-responsive Poly (N-isopropylacrylamide) (PNIPAM) hydrogel. By coating the hydrogel in a microchannel, the size of the hydrogel can be controlled via temperature to constrict the channel dimensions. Two hydrogel fabrication methods, namely, photolysis-based, and persulfate-based, was evaluated in terms of stability and volumetric response to temperature change of the hydrogel in two different microfluidic devices (Capillary Burst Valve (CBV) chip and straight microchannel). Results showed that a 100:1 monomer to crosslinker ratio through persulfate polymerization was optimal for a highly thermo-responsive and stable hydrogel that yielded ~44% volume change in both chips. Next, hydrogel coating process was performed via surface modification of microchannels with silanes and different microchannel geometries (straight and diagonal microchannels). Successful hydrogel coating was achieved via surface modification with vaporized Trichlorosilane in a 1_mm straight microchannel and a 5-channel chip without surface modification. For the latter, the hydrogel could sustain a flow rate of 10 mL/min at both swollen and unswollen condition. Taken together, the results demonstrated the promising potential of PNIPAM hydrogel as a novel method for tuning microfluidic device dimensions. These results provide opportunities for further optimization in hydrogel chemistry and surface coating of temperature-responsive hydrogel to enable fabrication of microfluidic devices with tunable dimensions.en_US
dc.language.isoenen_US
dc.publisherNanyang Technological Universityen_US
dc.relationA170en_US
dc.subjectEngineering::Manufacturing::Polymers and plasticsen_US
dc.subjectEngineering::Chemical engineering::Biotechnologyen_US
dc.subjectEngineering::Aeronautical engineeringen_US
dc.titleControl of microfluidics channel geometries using temperature-responsive hydrogelen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorHou Han Weien_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeBachelor of Engineering (Aerospace Engineering)en_US
dc.contributor.supervisoremailhwhou@ntu.edu.sgen_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
A170_FINAL REPORT_SIM JI LONG ELTON.pdf
  Restricted Access
2.24 MBAdobe PDFView/Open

Page view(s)

57
Updated on Oct 15, 2021

Download(s)

14
Updated on Oct 15, 2021

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.