Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/150691
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRobert, Sherman Louisen_US
dc.date.accessioned2021-06-02T05:33:38Z-
dc.date.available2021-06-02T05:33:38Z-
dc.date.issued2021-
dc.identifier.citationRobert, S. L. (2021). Experimental investigation of a PSA generator with various sensors to study and improve the performance. Final Year Project (FYP), Nanyang Technological University, Singapore. https://hdl.handle.net/10356/150691en_US
dc.identifier.urihttps://hdl.handle.net/10356/150691-
dc.description.abstractThe present study seeks to optimise oxygen production experimentally by employing a pressure swing adsorption generator and investigate the parameters of the designed PSA system that affect the quality. It is found that the purity of the oxygen produced is influenced by numerous variables, but in this project, the significant parameters such as pressure, purge flowrate, adsorption and pressurisation time are studied in detail. The molecular sieve namely zeolite JLOX-101 (in major capacity) and zeolite 13X (in minor quantity) are used. The surface characterisation of these two zeolites are also performed by the scanning electron microscopy (SEM) and thermogravimetric analyser. The findings reveal that the estimates for the optimal settings, that are preconceived from the theoretical understanding, turned out to be quite different due to operating conditions and the presence of irreversibility. PSA generators normally produce high purity when operating pressure and purge flow rate is high. However, experiments reveal that there is a point in between low and high operating conditions that produce optimal purity. Setting pressure to about 1.85 bar, around half the maximum operating pressure, achieved the highest purity for the pressure experiments. This discrepancy is in part due to other factors arising when the parameter being studied is varied. For instance, higher pressure tends to increase the flow rate of the feed gas to the adsorption chamber. The system is also found to favour the shorter adsorption and pressurisation time at 2s and 0.1s respectively. This is linked to the small scale of the laboratory setup as compared to larger adsorption beds used in the industry which can have adsorption time of a few minutes. The pressure swing adsorption generator used in the present study is proven to be promising for the possible application in the medical field despite its size. In order to achieve greater purity, relying on a more established and prevalent zeolite 13X as a main adsorbent may yield better results and the removal of argon gas must also be considered.en_US
dc.language.isoenen_US
dc.publisherNanyang Technological Universityen_US
dc.relationB232en_US
dc.subjectEngineering::Mechanical engineeringen_US
dc.titleExperimental investigation of a PSA generator with various sensors to study and improve the performanceen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorAnutosh Chakrabortyen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeBachelor of Engineering (Mechanical Engineering)en_US
dc.contributor.supervisoremailAChakraborty@ntu.edu.sgen_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
Sherman Robert FYP Report.pdf
  Restricted Access
5.04 MBAdobe PDFView/Open

Page view(s)

43
Updated on Oct 16, 2021

Download(s)

4
Updated on Oct 16, 2021

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.