Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSun, F.en_US
dc.contributor.authorZhang, D. Q.en_US
dc.contributor.authorCheng, L.en_US
dc.contributor.authorZheng, Paien_US
dc.contributor.authorLiao, D. M.en_US
dc.contributor.authorZhu, B.en_US
dc.identifier.citationSun, F., Zhang, D. Q., Cheng, L., Zheng, P., Liao, D. M. & Zhu, B. (2019). Microstructure evolution modeling and simulation for dynamic recrystallization of Cr12MoV die steel during hot compression based on real metallographic image. Metals and Materials International, 25(4), 966-981.
dc.description.abstractIn this work, microstructure evolution of dynamic recrystallization (DRX) behavior in Cr12MoV die steel was investigated via experiments and simulations systematically. Firstly, hot compression tests were performed to obtain the true stress–strain curves. Based on the experimental results, the flow stress model was established, and Avrami equation was developed to model the kinetics of DRX. Then, the cellular automaton (CA) model was established to describe DRX behavior. In order to obtain more accurate simulation results, a microstructure enhancement, extraction and conversion program based on fingerprint image enhancement algorithm was developed to generate real initial microstructure which could be directly used in CA simulation. With real initial microstructure generation, good agreement between simulated and experimental results was achieved, indicating the high accuracy of the established CA model. Finally, the CA model was employed to investigate the hot deformation behavior of Cr12MoV die steel under multiple thermomechanical conditions. It could be found that a lower strain rate was beneficial to the occurrence of DRX. When the strain rate was beyond 1.0 s⁻¹, the DRX fraction was very small. This work would provide a significant guidance to optimize the hot working process of Cr12MoV die steel or some other similar steels.en_US
dc.relation.ispartofMetals and Materials Internationalen_US
dc.rights© 2019 The Korean Institute of Metals and Materials. All rights reserved.en_US
dc.subjectEngineering::Mechanical engineeringen_US
dc.titleMicrostructure evolution modeling and simulation for dynamic recrystallization of Cr12MoV die steel during hot compression based on real metallographic imageen_US
dc.typeJournal Articleen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.subject.keywordsCr12MoV Die Steelen_US
dc.subject.keywordsHot Deformationen_US
dc.description.acknowledgementThis research is supported by the National Science Fund for Distinguished Young Scholars (NSFC51725504), the Program for New Century Excellent Talents in University (NCET-13-0229) and the National Science & Technology Key Projects of Numerical Control (2012ZX04010-031).en_US
item.fulltextNo Fulltext-
Appears in Collections:MAE Journal Articles

Page view(s)

Updated on Oct 18, 2021

Google ScholarTM




Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.