Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/150886
Full metadata record
DC FieldValueLanguage
dc.contributor.authorFaheem Fawzien_US
dc.date.accessioned2021-06-04T01:10:52Z-
dc.date.available2021-06-04T01:10:52Z-
dc.date.issued2021-
dc.identifier.citationFaheem Fawzi (2021). Design, build and test a UAV. Final Year Project (FYP), Nanyang Technological University, Singapore. https://hdl.handle.net/10356/150886en_US
dc.identifier.urihttps://hdl.handle.net/10356/150886-
dc.description.abstractThe future of vertical take-off and landing (VTOL) aerial vehicles looks promising with various companies having to develop these machines for air transport as well as air deliveries. A lot more tasks can be done by VTOL compared to a helicopter or a fixed-wing aircraft. VTOLS are designed to take off and land on limited amount of space as well as being able to fly as fast as fixed-wing aircrafts. This report consists of the development of a VTOL model that was based on previously developed model. The report will be focusing on the design and manufacturing of the model. A tilt rotor model canard structure was designed and manufactured. To maintain low structural weight, a classical semi-monocoque structure using plywood and balsa was used. Monokote film skin and fibreglass foam core wings were also used. The total weight of the VTOL model was 590 grams including batteries and electronic components. Structural simulation and structural testing were conducted to validate on how good and bad the comparisons are to each other. The structural simulation was conducted through Ansys Structural Simulation while the structural testing was conducted on a manufactured test rig whereby a laser measuring device was used to measure the amount of the deflection. Lastly, flight testing was conducted whereby the VTOL model were put through for different sequence of flight. The first flight test was hovering, followed by tilting of the rotor. Results shows that the VTOL model requires less power when the rotors are tilted as the wings are generating lift.en_US
dc.language.isoenen_US
dc.publisherNanyang Technological Universityen_US
dc.subjectEngineering::Aeronautical engineeringen_US
dc.titleDesign, build and test a UAVen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorBasman Elhadidien_US
dc.contributor.supervisorChan Wai Leeen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeBachelor of Engineering (Aerospace Engineering)en_US
dc.contributor.supervisoremailmbasman@ntu.edu.sg, chan.wl@ntu.edu.sgen_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
AY2020-21 A123 FYP FINAL 090521.pdf
  Restricted Access
2.91 MBAdobe PDFView/Open

Page view(s)

159
Updated on May 18, 2022

Download(s)

18
Updated on May 18, 2022

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.