Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/151292
Title: Bond-slip modeling of a CMC rockbolt element using 2D-DDA method
Authors: Nie, Wen
Zhao, Zhiye
Guo, Wei
Shang, Junlong
Wu, Chuangzhou
Keywords: Engineering::Civil engineering
Issue Date: 2019
Source: Nie, W., Zhao, Z., Guo, W., Shang, J. & Wu, C. (2019). Bond-slip modeling of a CMC rockbolt element using 2D-DDA method. Tunnelling and Underground Space Technology, 85, 340-353. https://dx.doi.org/10.1016/j.tust.2018.12.025
Journal: Tunnelling and Underground Space Technology
Abstract: The bonding condition at the rock and rockbolt interface is one of the most important factors to determine the load transfer mechanism of a CMC rockbolt element. The two-dimensional Discontinuous Deformation Analysis (2D-DDA) method is used in this paper to investigate the pullout performance of the CMC rockbolt element which is modeled as three components, i.e. the rock, the rockbolt and the mortar. The material properties used in the numerical models are calibrated against the experiments results. The simulated results show that a bond stress versus slip displacement curve of the CMC rockbolt element is exhibiting three stages which could be represented by a trilinear bond-slip model. Parametric studies have been carried out to investigate the effects of the confining pressure and those of the geometry configuration of the rockbolt ribs on the bond stress versus slip displacement curves and the crack propagations in the mortar. It is found that the maximum bond strength and the residual bond strength increase with the increase of confining pressure. Under lower confining pressure, the rib face angle controls the dilation of rock blocks. The obtained key parameters of the trilinear bond – slip models can be used to simulate the bond behavior between the rockbolt and rock interface in pullout test. The nodal axial forces and nodal bond force distributions along the rockbolt could be curve fitted using exponential models. The obtained parameters of the exponential models can be used for engineering practice under similar conditions.
URI: https://hdl.handle.net/10356/151292
ISSN: 0886-7798
DOI: 10.1016/j.tust.2018.12.025
Schools: School of Civil and Environmental Engineering 
Rights: © 2019 Elsevier Ltd. All rights reserved.
Fulltext Permission: none
Fulltext Availability: No Fulltext
Appears in Collections:CEE Journal Articles

SCOPUSTM   
Citations 20

24
Updated on Mar 24, 2024

Web of ScienceTM
Citations 20

16
Updated on Oct 28, 2023

Page view(s)

228
Updated on Mar 28, 2024

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.