Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/151335
Title: Plastic Instability in Co-Cr-Ni-Mo alloy wires drawn with different drawing practices
Authors: GVK, Sai Srikanth
Tan, Ming Jen
Liu, Zhenyun
Keywords: Engineering::Mechanical engineering
Issue Date: 2019
Source: GVK, S. S., Tan, M. J. & Liu, Z. (2019). Plastic Instability in Co-Cr-Ni-Mo alloy wires drawn with different drawing practices. Materials Science and Engineering A, 747, 80-97. https://dx.doi.org/10.1016/j.msea.2019.01.059
Project: COY-15-IPP-140010/198501914Z
Journal: Materials Science and Engineering A
Abstract: Plastic instability of Co-35Ni-20Cr-10Mo alloy was studied by inflicting the material to the different drawing process, namely Full Die Drawing (FDD) and Half Die Drawing (HDD). The wires were subjected to different plastic deformations, by varying the amount of cold work (CW) reduction, and the strain hardening exponent (γ) and strain rate sensitivity (m) were determined from the logarithmic plots of the true stress and strain curves. The experimental results indicated that wires drawn with FDD practice, when compared with the HDD drawn wires, had a lower instability until 75% CW, after which it increased significantly when drawn to 95% CW. The lower instability in the FDD wires at 75% CW, was attributed to the smaller grain size, higher dislocation density and lower twin spacing which contributed to higher γ and m. Plastic strain localization because of shear band formation was noticed in the FDD 95% CW wires, which contributed to lowered ductility and increased instability in the wire due to reduced γ and m. This phenomenon was not observed in HDD wires. Therefore, the results illustrate that the drawing technique employed to process the material has a significant impact on the plastic instability of the material, with the FDD practice recommended for lower CW deformations and HDD for higher CW deformations.
URI: https://hdl.handle.net/10356/151335
ISSN: 0921-5093
DOI: 10.1016/j.msea.2019.01.059
Rights: © 2019 Elsevier B.V. All rights reserved.
Fulltext Permission: none
Fulltext Availability: No Fulltext
Appears in Collections:MAE Journal Articles

Page view(s)

45
Updated on Oct 21, 2021

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.