Please use this identifier to cite or link to this item:
|Title:||Bonding temperature effects on the wide gap transient liquid phase bonding of Inconel 718 using BNi-2 paste filler metal||Authors:||Yan, Guangxu
Tan, Sung Chyn
Tan, Ming Jen
|Keywords:||Engineering::Mechanical engineering||Issue Date:||2019||Source:||Yan, G., Bhowmik, A., Nagarajan, B., Song, X., Tan, S. C. & Tan, M. J. (2019). Bonding temperature effects on the wide gap transient liquid phase bonding of Inconel 718 using BNi-2 paste filler metal. Applied Surface Science, 484, 1223-1233. https://dx.doi.org/10.1016/j.apsusc.2019.04.070||Project:||M-RT3.2||Journal:||Applied Surface Science||Abstract:||Transient liquid phase (TLP) bonding of Inconel 718 with BNi-2 filler metal has traditionally been carried out using thin filler metal (narrow gap) to achieve complete eutectic-free isothermal solidification layer joints. However, for the aerospace components with relatively large cracks or worn areas where a large amount of filler metal is needed, narrow gap TLP bonding is insatiable to meet the bonding requirements. In this paper, wide gap TLP bonding of Inconel 718 with the BNi-2 paste filler metal was carried out in a vacuum furnace. The bonding temperature effects on the interfacial microstructure, phase evolution and the mechanical properties of the bonded joints were investigated. It was found that the ultimate tensile bonding strength increased by 98% as the bonding temperature increased from 1015 °C to 1150 °C and the joint with the maximum tensile strength of 482 MPa was achieved after bonding at 1150 °C for 15 mins. However, more adverse heating was induced on the base metal of the joint under a higher bonding temperature. In addition, increasing bonding temperature from 1015 °C to 1150 °C improved the local plasticity of the bonded joints owing to the reduction of the homogeneously distributed Ni₃B type borides to a more heterogeneous distribution of borides.||URI:||https://hdl.handle.net/10356/151524||ISSN:||0169-4332||DOI:||10.1016/j.apsusc.2019.04.070||Rights:||© 2019 Published by Elsevier B.V. All rights reserved.||Fulltext Permission:||none||Fulltext Availability:||No Fulltext|
|Appears in Collections:||MAE Journal Articles|
Updated on Nov 30, 2021
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.