Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/152115
Full metadata record
DC FieldValueLanguage
dc.contributor.authorZhou, Mien_US
dc.contributor.authorSun, Zhuochaoen_US
dc.contributor.authorXiao, Zhekaien_US
dc.contributor.authorLow, Qiongweien_US
dc.contributor.authorSiek, Literen_US
dc.date.accessioned2021-07-19T08:51:46Z-
dc.date.available2021-07-19T08:51:46Z-
dc.date.issued2018-
dc.identifier.citationZhou, M., Sun, Z., Xiao, Z., Low, Q. & Siek, L. (2018). A fast transient response DC-DC converter with an active compensation capacitor module. 2018 IEEE International Symposium on Circuits and Systems (ISCAS). https://dx.doi.org/10.1109/ISCAS.2018.8351680en_US
dc.identifier.isbn978-1-5386-4882-7-
dc.identifier.issn2379-447X-
dc.identifier.urihttps://hdl.handle.net/10356/152115-
dc.description.abstractAn active capacitor module is proposed to be implemented as a dynamic compensation capacitor at the output of the operational transconductance amplifier (OTA) to improve the load transient response of a DC-DC converter. To enhance the response speed during transient event, an active compensation capacitor module (ACM) is adopted to instantly reduce the capacitance of the compensation capacitor. Compared to the traditional approaches by increasing the transconductance gm of the OTA which introduce higher power consumption, the proposed ACM is more power efficient and it also occupies seven times smaller footprint than the large passive compensation capacitor in this work. A current-mode buck DC-DC converter with an ACM is implemented in 0.18 μim CMOS process and simulated across different process corners. Post-layout simulation results show an excellent load regulation of 0.008 mV/mA during load current variations from 50 μA to 1 A in 1 μs, and the proposed converter is working excellently under different load current steps. Output overshoot/undershoot voltages of 15 mV/22.8 mV with 5.9 μs/6 μs recovery time and 29.5 mV/47.5 mV with 8.8 μs/7.2 μs recovery time are obtained under 0.5 A load current step and 1 A load current step respectively from the simulation. Compared with the conventional converter without ACM, the output overshoot/undershoot voltage and recovery time are approximately reduced by twice and five times respectively.en_US
dc.description.sponsorshipAgency for Science, Technology and Research (A*STAR)en_US
dc.description.sponsorshipEconomic Development Board (EDB)en_US
dc.description.sponsorshipNanyang Technological Universityen_US
dc.language.isoenen_US
dc.rights© 2018 Institute of Electrical and Electronics Engineers (IEEE). All rights reserved.en_US
dc.subjectEngineering::Electrical and electronic engineeringen_US
dc.titleA fast transient response DC-DC converter with an active compensation capacitor moduleen_US
dc.typeConference Paperen
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.contributor.conference2018 IEEE International Symposium on Circuits and Systems (ISCAS)en_US
dc.contributor.organizationEDBen_US
dc.contributor.organizationA*STARen_US
dc.contributor.organizationMaxim Integrateden_US
dc.contributor.researchVIRTUS, IC Design Centre of Excellenceen_US
dc.identifier.doi10.1109/ISCAS.2018.8351680-
dc.subject.keywordsDC-DC Converteren_US
dc.subject.keywordsFast Transient Responseen_US
dc.citation.conferencelocationFlorence, Italyen_US
dc.description.acknowledgementThe authors would like to acknowledge the funding support from NTU-A*STAR Silicon Technologies Centre of Excellence under the program grant No. 11235100003.en_US
item.grantfulltextnone-
item.fulltextNo Fulltext-
Appears in Collections:EEE Conference Papers

Page view(s)

102
Updated on Jun 30, 2022

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.