Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/153846
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMuhammad Hafiq Roslien_US
dc.date.accessioned2021-12-14T06:02:28Z-
dc.date.available2021-12-14T06:02:28Z-
dc.date.issued2021-
dc.identifier.citationMuhammad Hafiq Rosli (2021). Split Hopkinson pressure bar tensile testing. Final Year Project (FYP), Nanyang Technological University, Singapore. https://hdl.handle.net/10356/153846en_US
dc.identifier.urihttps://hdl.handle.net/10356/153846-
dc.description.abstractThe Split Hopkinson Pressure Bar (SHPB) is an experimental technique used to investigate the mechanical properties of a material at different loading conditions under high strain rates, ranging from 1,000s-1 to 10,000s-1 . There are three types of techniques, namely tension, compression, and torsion. This report focuses only on the tensile aspect of the SHPB. The SHPB tensile experiment requires the generation of longitudinal waves that propagates along the experimental setup. The strain gauges located on the input and output bar then measures these longitudinal waves. The data collected by the strain gauge is then channelled and displayed on the Yokogawa oscilloscope where the stress, strain and strain rate are then calculated and analysed. Unlike the past, the main objective of this current project is to repair and recalibrate the SHPB tensile machine. This is due to the machine not being able to operate at optimum performance. This project involves dismantling the machine to analyse the issue and make necessary repairs before assembling the machine again. The machine is then realigned and recalibrated to ensure that the machine can operate at optimum capabilities again. To verify the performance of the machine, a simple test with specimen is then conducted to obtain similar results as previous project. This report will also discuss the various challenges faced and solutions recommended for further improvements.en_US
dc.language.isoenen_US
dc.publisherNanyang Technological Universityen_US
dc.relationB446en_US
dc.subjectEngineering::Mechanical engineeringen_US
dc.titleSplit Hopkinson pressure bar tensile testingen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorShu Dong Weien_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeBachelor of Engineering (Mechanical Engineering)en_US
dc.contributor.supervisoremailMDSHU@ntu.edu.sgen_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
Hafiq_B446_SHPB Tensile Test_ FYP Final Report.pdf
  Restricted Access
4.52 MBAdobe PDFView/Open

Page view(s)

44
Updated on Aug 14, 2022

Download(s)

7
Updated on Aug 14, 2022

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.