Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/153907
Title: Dynamic plastic deformation and failure mechanisms of individual microcapsule and its polymeric composites
Authors: Zhang, Xin
Wang, Pengfei
Sun, Dawei
Li, Xin
An, Jinliang
Yu, T. X.
Yang, En-Hua
Yang, Jinglei
Keywords: Engineering::Civil engineering
Issue Date: 2020
Source: Zhang, X., Wang, P., Sun, D., Li, X., An, J., Yu, T. X., Yang, E. & Yang, J. (2020). Dynamic plastic deformation and failure mechanisms of individual microcapsule and its polymeric composites. Journal of the Mechanics and Physics of Solids, 139, 103933-. https://dx.doi.org/10.1016/j.jmps.2020.103933
Journal: Journal of the Mechanics and Physics of Solids
Abstract: Functional materials are widely used by introducing functional microcapsules in the matrix. The individual microcapsule can be regarded as core-shell structure in micro-level. In this study, mechanical performance of individual microcapsule with different shell types (PUF, silica, and nickel) and corresponding microcapsule-modified polymers under quasi-static as well as dynamic compressions are studied experimentally and numerically. Results show that the strength of the nickel shell-based microcapsule is two orders higher than that of the other two microcapsules at different strain rates. More cracks and fragments are observed in microcapsule subject to dynamic loading, which indicates higher energy dissipation under impact. The inclusion of nickel shell-based microcapsule does not cause strength reduction of the resulting microcapsule-modified polymer at all strain rates, while the use of PUF and silica shell-based microcapsules lead to significant reduction of the composites strengths. Nickel shell-based microcapsule-modified polymer shows high strain rate sensitivity than the other two microcapsule-modified polymers. Furthermore, nickel shell-based microcapsule-modified polymer shows distinct failure modes when compared to the PUF and the silica shell-based microcapsule-modified polymers. While matrix cracks tend to penetrate through the weak PUF and silica shell-based microcapsules, they often propagate along the nickel shell-based microcapsule/epoxy matrix interface due to a much higher strength of the nickel shell-based microcapsule. After debonding, sliding of the fracture surfaces may lead to the final fracture of some weaker Ni microcapsules in the nickel shell-based microcapsule-modified polymer.
URI: https://hdl.handle.net/10356/153907
ISSN: 0022-5096
DOI: 10.1016/j.jmps.2020.103933
Rights: © 2020 Elsevier Ltd. All rights reserved.
Fulltext Permission: none
Fulltext Availability: No Fulltext
Appears in Collections:CEE Journal Articles

Page view(s)

29
Updated on May 18, 2022

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.