Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/154206
Title: Surface finishing on IN625 additively manufactured surfaces by combined ultrasonic cavitation and abrasion
Authors: Tan, Kheng Leong
Yeo, Sweehock
Keywords: Engineering::Mechanical engineering
Issue Date: 2020
Source: Tan, K. L. & Yeo, S. (2020). Surface finishing on IN625 additively manufactured surfaces by combined ultrasonic cavitation and abrasion. Additive Manufacturing, 31, 100938-. https://dx.doi.org/10.1016/j.addma.2019.100938
Journal: Additive Manufacturing
Abstract: The poor and non-uniform surface quality of parts produced by powder bed fusion (PBF) processes remains a huge limitation in additive manufacturing. Here we show that ultrasonic cavitation abrasive finishing (UCAF) could improve the surface integrity of PBF surfaces built at various orientations –0°, 45° and 90°. Average surface roughness, Ra, was reduced from as high as 6.5 μm on side surfaces (90°) to 3.8 μm. Surface morphological observations showed extensive removals of surface irregularities and peak reduction on sloping (45°) and side surfaces. The micro-hardness of the first 100 μm of the surface layer was enhanced up to 15 % post-UCAF. Dimensional changes were minimal and uniquely dependent on the initial surface characteristics. A parametric study further showed the effect of abrasive size, abrasive concentration, ultrasonic amplitude and working gap on UCAF's performance. A moderate abrasive size at 12.5 μm and concentration level at 5 wt% resulted in the lowest final Ra; as the two dominant material removal mechanisms – direct cavitation erosion and micro-abrasive impacts – were balanced. Finally, UCAF was demonstrated to result in 20 % Ra improvement of internal surfaces of a 3 mm diameter channel.
URI: https://hdl.handle.net/10356/154206
ISSN: 2214-7810
DOI: 10.1016/j.addma.2019.100938
Rights: © 2019 Elsevier B.V. All rights reserved.
Fulltext Permission: none
Fulltext Availability: No Fulltext
Appears in Collections:MAE Journal Articles

Page view(s)

27
Updated on May 19, 2022

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.