Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/154292
Title: Experimental study on web crippling of high strength steel channel sections under end two flange loading condition
Authors: Kaung, Si Thu
Keywords: Engineering::Civil engineering::Structures and design
Issue Date: 2021
Publisher: Nanyang Technological University
Source: Kaung, S. T. (2021). Experimental study on web crippling of high strength steel channel sections under end two flange loading condition. Final Year Project (FYP), Nanyang Technological University, Singapore. https://hdl.handle.net/10356/154292
Project: ST-47
Abstract: This report presents an experimental study on web crippling of high strength steel S690 and S960 channels. Six S690 steel specimens and four S960 steel channel section specimens were tested under end two flange (ETF) loading condition. The corresponding test set-up, experimental procedures, load-deformation curves, and ultimate loads were reported in detail. Given that design rules for high strength steel channels under ETF loading are not available, the obtained test results were compared with resistance predictions from (i) Eurocode EN 1993-1-3, (ii) American specification AISI S100 to assess the suitability of the codified design equations for the high strength steel channels. The comparison study shows that the EN 1993-1-3 provides conservative resistance predictions whereas the AISI S100 gives overly unconservative capacity estimations.
URI: https://hdl.handle.net/10356/154292
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:CEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
Kaung Si Thu FYP Final.pdf
  Restricted Access
1.59 MBAdobe PDFView/Open

Page view(s)

60
Updated on May 23, 2022

Download(s)

4
Updated on May 23, 2022

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.