Please use this identifier to cite or link to this item:
https://hdl.handle.net/10356/15498
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Lim, Zi Xin. | - |
dc.date.accessioned | 2009-05-07T03:12:07Z | - |
dc.date.available | 2009-05-07T03:12:07Z | - |
dc.date.copyright | 2009 | en_US |
dc.date.issued | 2009 | - |
dc.identifier.uri | http://hdl.handle.net/10356/15498 | - |
dc.description.abstract | The use of macroforming technology to produce microproducts has problem such as poor mechanical properties and rough surface due to relatively large grains and fewer grain boundaries. Hence, there is a need to achieve grain refinement in materials in order to have better properties and yet is cost-effective for mass production. Severe plastic deformation is gaining attention due to the simplicity of tools and procedures in producing ultrafine grains. It is also a cost-effective method due to the ability of bulk production. Multi directional forging (MDF) is a method of severe plastic deformation in which large amount of plastic strains is stored in the material with repeated cycles of MDF without significant changes in dimensions. In this project, MDF was done on copper samples to obtain grain refinement. The results showed that after MDF, there were a reduction in grain size and an enhancement in hardness. This is mainly due to formation of deformation bands such as microshear bands. This resulted in fragmentation of grain with high angle boundaries, leading to formation of small grains. The high hardness of copper is due to strain hardening and increased grain boundaries due to small grains. Thermal annealing of the MDFed copper samples were also done at different annealing temperatures. The results showed that annealing was accompanied by a drop in hardness and an increase in grain size and at higher temperature, hardness is reduced at a higher rate. This is mainly due to higher diffusivity of atoms, which leads to faster recrystallisation and grain growth in the samples. | en_US |
dc.format.extent | 40 p. | en_US |
dc.language.iso | en | en_US |
dc.rights | Nanyang Technological University | - |
dc.subject | DRNTU::Engineering::Materials | en_US |
dc.title | Study of multidirectional forging and annealing on copper | en_US |
dc.type | Final Year Project (FYP) | en_US |
dc.contributor.supervisor | Seow Hong Pheow | en_US |
dc.contributor.school | School of Materials Science and Engineering | en_US |
dc.description.degree | Bachelor of Engineering (Materials Engineering) | en_US |
item.fulltext | With Fulltext | - |
item.grantfulltext | restricted | - |
Appears in Collections: | MSE Student Reports (FYP/IA/PA/PI) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
MSE08-015.pdf Restricted Access | 1.89 MB | Adobe PDF | View/Open |
Page view(s) 50
492
Updated on Mar 28, 2024
Download(s)
4
Updated on Mar 28, 2024
Google ScholarTM
Check
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.