Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/155317
Full metadata record
DC FieldValueLanguage
dc.contributor.authorHuang, Jingjingen_US
dc.contributor.authorZhang, Xinen_US
dc.contributor.authorZhang, Zheen_US
dc.date.accessioned2022-02-23T06:28:29Z-
dc.date.available2022-02-23T06:28:29Z-
dc.date.issued2019-
dc.identifier.citationHuang, J., Zhang, X. & Zhang, Z. (2019). Three-step switching frequency selection criteria for the generalized CLLC-type DC transformer in hybrid AC-DC microgrid. IEEE Transactions On Industrial Electronics, 67(2), 980-991. https://dx.doi.org/10.1109/TIE.2019.2898625en_US
dc.identifier.issn0278-0046en_US
dc.identifier.urihttps://hdl.handle.net/10356/155317-
dc.description.abstractFor hybrid ac-dc microgrids, the widely applied high-frequency dc transformer (DCT) is usually scheduled to operate at resonant frequency with 50% duty-cycle-based semiregulated control to ensure the power transmission (PT), improve its power-density, and simplify the system-level control. However, for a real DCT, it may exist more than one resonant frequency that exhibit totally different features, which may seriously degrade the PT ability if the inappropriate switching frequency is selected. Meanwhile, the actual values of the DCT inductances and capacitances are also changing with the power, temperature, etc., which may lead to the practical resonant frequency's variation. Thus, how to select the suitable switching frequency to guarantee the PT ability against the parameter variation becomes a challenge. In this paper, three-step switching frequency selection criteria (SFSC) are proposed. A generalized CLLC-type DCT (GCLLC-DCT) model is extracted to make the proposed approach available for the LLC-, CLL-, symmetric CLLC-, and asymmetric CLLC-type topologies. For convenience, the definition of the active power transmission ratio (APTR) is introduced to help evaluate the PT ability. First, the number, value, and impact variables of the resonant frequency are derived and analyzed in Step I as the preliminary. Afterward, the optimum resonant frequency is confirmed for the GCLLC-DCT as the criterion based on the APTR in Step II. At last, the criterion in Step III is given to finally determine the switching frequency against the parameter variations. The proposed SFSC method is also validated by the experiments.en_US
dc.language.isoenen_US
dc.relation.ispartofIEEE Transactions on Industrial Electronicsen_US
dc.rights© 2019 IEEE. All rights reserveden_US
dc.subjectEngineering::Electrical and electronic engineeringen_US
dc.titleThree-step switching frequency selection criteria for the generalized CLLC-type DC transformer in hybrid AC-DC microgriden_US
dc.typeJournal Articleen
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.identifier.doi10.1109/TIE.2019.2898625-
dc.identifier.scopus2-s2.0-85071623935-
dc.identifier.issue2en_US
dc.identifier.volume67en_US
dc.identifier.spage980en_US
dc.identifier.epage991en_US
dc.subject.keywordsMicrogridsen_US
dc.subject.keywordsTopologyen_US
dc.description.acknowledgementThis work was supported by the National Natural Science Foundation of China under Grant 51507138, as well as in part by the start-up grant (SCOPES) of Professor Xin Zhang.en_US
item.grantfulltextnone-
item.fulltextNo Fulltext-
Appears in Collections:EEE Journal Articles

Page view(s)

31
Updated on Jun 28, 2022

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.