dc.contributor.authorTan, Chong Wei
dc.date.accessioned2009-05-13T03:46:58Z
dc.date.accessioned2017-07-23T08:39:21Z
dc.date.available2009-05-13T03:46:58Z
dc.date.available2017-07-23T08:39:21Z
dc.date.copyright2009en_US
dc.date.issued2009
dc.identifier.citationTan, C. W. (2009). Carbon based materials for MEMS applications. Master’s thesis, Nanyang Technological University, Singapore.
dc.identifier.urihttp://hdl.handle.net/10356/15557
dc.description.abstractCNTs have been a subject of interest by many researchers since its discovery by Ijima in 1991. With its excellent electrical and mechanical properties, many researchers have exploited its advantageous electrical properties for use in integrated circuits interconnects and field emission devices. However, very few researchers have explored its extraordinary mechanical properties. With its high elastic modulus and high buck resistance, CNTs would make very good structural materials. Many researchers have been trying to control the density of the CNTs growth by using sophisticated and expensive techniques such as electron beam lithography and ion beam bombardment. Density control of CNTs has been demonstrated by a cheap novel combination of steps consisting of annealing, etching and ultraviolet overexposure. Sub-micron sized single CNT has been successfully demonstrated using the above-mentioned technique. Two different and completely new methods of utilizing CNTs are being introduced, namely as templates and damping. It has been demonstrated that materials can be deposited and encapsulate the CNTs pillars. The ‘nanoballs’ effect of top layer material on CNTs has also been explained. Successful coverage on single CNT has been demonstrated. The possibility of using DLC-CNTs hybrid material has been successfully shown.en_US
dc.format.extent164 p.en_US
dc.format.extent153en_US
dc.language.isoenen_US
dc.subjectDRNTU::Engineering::Mechanical engineering::Prototypingen_US
dc.titleCarbon based materials for MEMS applicationsen_US
dc.typeThesis
dc.contributor.researchMicroMachines Centreen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.contributor.supervisorMiao Jianmin (MAE)en_US
dc.contributor.supervisorTay Beng Kang (EEE)en_US
dc.description.degreeMASTER OF ENGINEERING (MAE)en_US


Files in this item

FilesSizeFormatView
Tan_Chong_Wei.pdf5.459Mbapplication/pdfView/Open

This item appears in the following Collection(s)

Show simple item record